Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
4-inch square removable-bottom pan
|
CN¥ 13.1 |
5-inch square with a removable bottom
|
CN¥ 17.2 |
6-inch square springform pan
|
CN¥ 26.1 |
7-inch square with a removable bottom
|
CN¥ 30.8 |
8-inch square springform pan
|
CN¥ 34.2 |
9-inch square springform pan
|
CN¥ 39.8 |
10-inch square with a removable bottom
|
CN¥ 45.9 |
11-inch square springform pan
|
CN¥ 60.7 |
12-inch square springform pan
|
CN¥ 66.5 |
14-inch square springform pan
|
CN¥ 78.1 |
4-inch square fixed base
|
CN¥ 12.1 |
5-inch square fixed base
|
CN¥ 15.8 |
6-inch square fixed base
|
CN¥ 24.4 |
7-inch square fixed base
|
CN¥ 29.6 |
8-inch square fixed bottom
|
CN¥ 33.3 |
9-inch square fixed base
|
CN¥ 38.3 |
10-inch square fixed base
|
CN¥ 44.4 |
11-inch square fixed base
|
CN¥ 47.2 |
12-inch square fixed base
|
CN¥ 51.7 |
14-inch square fixed base
|
CN¥ 63.4 |
Square cake base mold with movable bottom
Specifications and dimensions are shown in Figure 1:
4~8 inches 20 pieces/box
9~14 inches, 10 pieces per box
Thickened sheet material
Wall thickness: 1.2 mm
straight-body design
four corners welding
Independently packaged in color boxes
Aluminum alloy/anodized.
High-quality aluminum alloy 3003 hot-rolled sheet
The surface is smooth and hard.
380-degree high-temperature baking repeatedly without softening. Double-sided film to minimize production process damage
Scratches on the surface.
Anodic treatment is a surface coating technology for aluminum alloy mold. The common purpose of this treatment is to prevent the aluminum from leaching out at high temperatures, serving as an isolation layer, thus preventing damage to human health. Anodic coating is a layer of electroplating film that forms a protective layer on the surface of the aluminum alloy, making it less likely to decompose or leach out. Therefore, whether for the mold or for human health, it provides a protective effect. However, the coating is relatively soft and can be scratched, so it is important to avoid using hard objects to clean it.
Independently packaged in color boxesnbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbspAnode Product Usage Instructions:
1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or soft plastic scraping tool.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.
Anode Product Usage Notes:
1. Please do not use sharp metal tools, scrubbing pads, or chemical cleaners to clean.
2. Do not immerse in water or cleaning agents for a long time.
3. When using, please handle with care, and when storing, be careful to place gently, and avoid accidental collisions or friction due to carelessness, which may cause wear or scratches to the non-stick coating.
4. The baking temperature of the anode processing equipment is lower than 250 degrees, and it is necessary to ensure uniform heating as much as possible, and it is not allowed to be burned empty.
Update time：
TOP
