square loaf form cake mold anode with cover square bag mold 6 ~ 10cm square bag mold water cube loaf form 正方形面包模蛋糕模 阳极带盖方包模 6~10CM正方包模水立方面包模

Product Name: Square Shaped Packaging Box

 6~10cm 6 specifications

 The weight of the set with the lid included.

3003 aluminum alloy

Anodic oxidation treatment, black double-sided non-stick

Adheres to the American Huafu brand coating, double-sided non-stick

Quality reliable!

Four-corner welding with a ventilation hole at the bottom

Anodic treatment is a surface coating technology for aluminum alloy mold. The common purpose of this treatment is to prevent the aluminum from leaching out at high temperatures, serving as an isolation layer, thus preventing damage to human health. Anodic coating is a layer of electroplating film that forms a protective layer on the surface of aluminum alloy, making it less likely to decompose or leach out. Therefore, whether for the mold or for human health, it provides a protective effect. However, the coating is relatively soft and prone to scratching, so it is important to avoid oxidation - it should be kept clean, hygienic, and have a long service life.

3. Hygiene - Meets food hygiene standards
4. High strength, with a hardness of 9-11 degrees, durable and sturdy
5. The material is light, with a specific gravity of only one-third that of iron, making it even more lightweight.
6. Good heat transfer, saves baking time, and saves costs.

Anode Product Usage Instructions:
1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or a soft plastic scraping tool to remove any residual materials left in the equipment.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.

Anode Product Usage Notes:
1. Please do not use sharp metal tools, scrubbing pads, or chemical cleaners to clean.
2. Do not immerse in water or cleaning agents for a long time.
3. When using, please handle with care, and when storing, be careful to place gently, and avoid accidental collisions or friction due to carelessness, which may cause wear or scratches to the non-stick coating.
4. The baking temperature of the anode processing equipment is lower than 250 degrees, and it is necessary to ensure uniform heating as much as possible, and it is not allowed to be burned empty.