Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
4-inch shallow semicircle
|
CN¥ 5.2 |
5-inch shallow semicircle
|
CN¥ 6.1 |
6-inch shallow semicircle
|
CN¥ 8.9 |
7-inch shallow semicircle
|
CN¥ 12.7 |
8-inch shallow half-moon
|
CN¥ 15.8 |
Product Name: 6.5-inch Semi-Circular Pudding Cake Mold
Model: H106
Specification: 155X75mm Wall thickness: 0.9mm Weight: 91g
Aluminum alloy/anodized.
1x50个
Anodic treatment is a surface coating technology for aluminum alloy molds. The common goal of these treatments is to prevent aluminum from leaching out at high temperatures, serving as a barrier, thereby protecting human health. Anodic coatings are a layer of electroplating film that forms a protective layer on the surface of aluminum alloy, making it less likely to decompose or leach out. Therefore, whether for the molds or for human health, there is a protective effect. However, the coating is relatively soft and can be scratched, so it is important to avoid using hard objects to clean it.
Anode Product Usage Instructions:
1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or a soft plastic scraping tool to remove any residual materials left in the equipment.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.
Update time：
TOP
