Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
6-inch embossed pizza plate
|
CN¥ 6.6 |
7-inch embossed pizza plate
|
CN¥ 8.8 |
8-inch embossed pizza plate
|
CN¥ 9.9 |
9-inch embossed pizza plate
|
CN¥ 11.4 |
10-inch embossed pizza plate
|
CN¥ 12.8 |
Product Name: Anode Pressed Pattern Pizza Platenbsp nbsp nbsp nbspSpecifications and Dimensions:
6 inch 150X125X225 mm Wall thickness: 1mm Weight: 63gnbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp7 inch 178X150X28 mm Wall thickness: 1mm Weight: 89g
8 inch 200X175X28 Wall thickness: 1mm Weight: 98g
9 inch 225X200X28 Wall thickness: 1mm Weight: 136g
10 inch 250X225X28 mm Wall thickness: 1mm Weight: 160gnbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbspAluminum alloy/anodized.
1x50个
For pizza cake making
3003 high-quality aluminum alloy anodic oxidation treatmentnbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbsp nbspnbspThis page sells anodic oxide pizza trays.
Anode Product Usage Instructions:
1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or a soft plastic scraping tool to remove any residual materials left in the equipment.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.
Anode Product Usage Notes:
1. Please do not use sharp metal tools, scrubbing pads, or chemical cleaners to clean.
2. Do not immerse in water or cleaning agents for a long time.
3. When using, please handle with care, and when storing, be careful to place gently, and avoid accidental collisions or friction due to carelessness, which may cause wear or scratches to the non-stick coating.
4. The baking temperature of the anode processing equipment is lower than 250 degrees, and it is necessary to ensure uniform heating as much as possible, and it is not allowed to be burned empty.
Update time:
TOP