kitchen supplies · 4-inch tooth edge cake mold aluminum cake mold h209 large tart mold baking

Product Name and Model: H209 4-inch Fluted Cake Mold

Specification: 102X85X20

 Wall thickness: 0.8mm

Weight: 30g

Aluminum alloy

Anode treatment.

1x50nbsp nbsp nbsp nbsp nbsp nbsp    =Anode Product Usage Instructions:

1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or a soft plastic scraping tool to remove any residual materials left in the equipment.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.

  Anode Product Usage Notes:
1. Please do not use sharp metal tools, scrubbing pads, or chemical cleaners to clean.
2. Do not immerse in water or cleaning agents for a long time.
3. When using, please handle with care, and when storing, be careful to place gently, and avoid accidental collisions or friction due to carelessness, which may cause wear or scratches to the non-stick coating.
4. The baking temperature of the anode processing equipment is lower than 250 degrees, and it is necessary to ensure uniform heating as much as possible, and it is not allowed to be burned empty.