疑问之处:
Question: Why is there water stains on the car washing machine?
Answer: We will conduct a final water leak test before shipping to ensure that the equipment operates normally, so there might be traces of water. We are a conscientious seller.
Why doesn't it absorb water after turning on the power?
Insert the cigarette lighter plug into the car's cigarette lighter, and the pump will start working immediately (without sucking water at this time), press the nozzle, to discharge the air in the tube, the water supply pipe will automatically suck water until there is no air in the water supply pipe, then it can reach the maximum pressure (this process takes about 3 to 5 seconds)
Why does the joint leak?
The pipe hasn't been fully inserted yet, and the correct insertion depth is about 1.8 cm; if the water gun fitting leaks, please wrap enough plastic tape and then connect it.
Why is it difficult to pull out the water outlet pipe after use?
The answer is because there is pressure in the pipe. The correct operation is: before disconnecting the power, you can pull out the inlet water pipe from the water, open the water gun, and drain the water from the inlet pipe and the pump (the water in the outlet pipe can be ignored); disconnect the power, pull the trigger of the water gun, and drain the pressure from the outlet pipe (this operation can be performed before removing the water pipe); at this time, press the blue interface of the quick connector, and the water pipe can be easily removed.
Question: Why does the spray gun still not absorb water after air is discharged, or if it does, it does not work smoothly, and the pressure decreases?
Answer: Please check the following places:
1) Is the filter clogged or adhering to the bucket wall.
2) Check the water inlet hose to ensure that the water inlet channel is smooth.
3) Pull the trigger, rotate the nozzle of the water gun to see if it is clogged, clean the debris, then pull the trigger and tighten the nozzle of the water gun.
4) If the water pressure decreases after a period of use, please open the pump cover, loosen the screws at the top and bottom by 7 times, clean the scale on the two membrane plates, and then reinstall them in the original state.
5) If the pump has been unused for a long time and becomes too dry, please connect the power and operate the pump, simultaneously sucking water from the outlet forcefully, or pour water into the inlet.
Question: Can car shampoo be used with hot water? How should it be preserved if it's not used for a long time?
Answer: Please do not use water above 80℃. At the same time, please ensure that the front of the inlet pipe is filtered to remove impurities, as impurities can cause damage to the water pump. In winter, please try to drain the water from the water pump after use.
Question: Does the car washing machine have a warranty?
Of course, there is a warranty. The motor is covered by a one-year warranty. This car washing machine uses a simple high-pressure diaphragm pump structure, which has a low failure rate. Please rest assured to use it. If you encounter any problems or questions during use, feel free to contact us at any time. Please trust our full-hearted service!
Original manufacturer, large quantity, detailed discussion, support private label
consult
Many configurations, please discuss in detail.
For 45 yuan per set, this is the standard configuration.
Standard configuration only includes:
A set of pure copper filter mesh, inlet pipe, pump, teat, gasket, outlet pipe, quick connect, water gun!
Double Pump Motor: Please contact our customer service for more details about the accessories you need (such as converters, car washing brushes, etc.)