lithium electric hot melt glue gun wireless home rechargeable children's handmade diy glue stick multi-purpose portable electric melt guns

 Before Buying Instructions

1.The lithium battery hot melt glue gun needs to be preheated for a certain amount of time before it can be used.

2. The current weather is quite hot, causing the adhesive tape to be somewhat soft. Sometimes, the clasp positions cannot be pushed through, so it is recommended to gently push the tape with your hands, or to use it after dipping it in cold water and wiping it dry. If the tape is already in the glue gun, you can gently push it with your hands.

3.Lithium battery-powered glue guns will definitely heat up more slowly and produce glue more slowly than those with wires. If the use is not affected, please apply for product returns and voluntarily deduct the shipping costs.

If you really mind the above operation, please do not take pictures, thank you!!!!

Due to the recent large fluctuations in lithium battery prices, the final price is subject to real-time quotations based on the quantity.

Hot melt glue gun packing parameters:
Packing Size: 48*35.5*40CM
Gross Weight of the Box: 13kg
Net weight in the box: 9.3kg
Packing Quantity: 60pcs
Single color box size: 13*17*4.5CM
Single piece gross weight: 0.1957kg

Product power: 11W
Sol temperature: 65-80 degrees
Working Voltage: 3.7V
Nozzle diameter: 2-3MM
Product Battery: Rechargeable Battery 1800mAh

Before using the glue gun, please preheat for 3-5 minutes.

Please keep the surface of the hot melt adhesive tape clean to prevent impurities from blocking the nozzle.
When the glue gun is not in use, please stand it upright on the desk, do not turn it upside down, otherwise it may cause the glue to flow backwards, which could damage the glue gun and cause the glue sticks to become thicker and get stuck in the nozzle, making it impossible to dispense glue.
When the glue stick in the glue gun is not completely used up, please do not pull the glue stick out of the glue gun.
If the glue gun experiences backflow of the glue, please immediately stop using it and wait until it is cleaned before continuing.
If you find that the glue gun is not discharging glue during use, please check if the glue gun is hot.
(1) If the glue gun does not work normally, the reason may be:
a. The glue gun power supply is not plugged in properly.
b. The glue gun burns out due to a short circuit.
(2) If the hot glue gun is working normally, the reason may be:
a. The nozzle of the gun is blocked by impurities, which should be handled by professionals.
b. When the glue gun is used to pour glue to make the glue strip thicker, you can simply rotate the glue strip gently once and carefully pull it back a little bit. Peel off the thickened part of the glue strip and continue to use it.