220v high-voltage 2835 flexible soft tri‑color rgb ambient silicone neon outdoor led strip, waterproof linear light bar 220v高压2835柔性软三色rgb氛围硅胶霓虹户外led灯带防水线型灯条

Lighting strip accessories link click to purchase https://detail.1688.com/offer/557895962483.html?spm=a2615.7691456.newlist.102.733f3da6ODEWvR (Lighting strip without any accessories needs to be purchased separately).

One piece for 1 meter (supports customizing) options not listed as whole roll for retail, options marked as whole roll are sold in whole rolls, one roll is 100 meters and is not sold individually. The variety of light strip styles has incomplete labeling, and if there are any other requirements, you can contact customer service for support customizing. This link's light strip is 100 meters per roll, and if it is cut, it is not a quality issue and will not be exchanged or returned unless it is a whole roll that has not been cut. If the 100-meter roll is cut and there is no quality issue, it will not be exchanged or returned. Light strips are mainly sold in bulk, so they do not include any accessories. For outdoor or environments with moisture, the joints and tails need to be sealed with glue to protect against water infiltration. It is also not recommended to leave the light strip in water for a long time. Regular options are not recommended for use in wet environments, and it is recommended to use them for no more than four hours a day. For options that can be left on for a long time, it is recommended to use them for no more than ten hours a day. It is not recommended to use it for a long time or to operate it while it is powered. When hanging, it should be fixed about half a meter away and not pulled forcefully to avoid damage. The light strip should be installed on insulating materials and not on conductive materials, which could cause short circuits. It is not recommended to install it in conductive or flammable and explosive environments or in sealed environments. It should be installed in a well-ventilated and well-cooled environment. The light strip can only be connected to a single plug. The light strips with 220V have flickering when photographed, and if you need a plug without flickering, you can contact customer service for custom-made. The light strip cannot be used in aluminum grooves, as they cannot be ventilated and cooled. There is no warranty for use in aluminum grooves (except for the aluminum groove model). For models with adhesive backs, installation requires a distance to be added with glue to reinforce. The light strip can only be cut at the empty space in the roll, and the whole roll cannot be lit. It must be spread out and lit to test. If it is lit together, the temperature cannot be dissipated, which is easy to melt the middle. The plugs should be inserted into the center of the wires and not offset (if offset, it is easy to trip and cause damage to the plug and light strip). The light strip has positive and negative poles, and it will not light normally when installed. If you turn the light strip around and connect it to the plug, it will light up. The light strip needs to be connected to the matching plug to use, and if it is not matched or not connected, it may cause damage. Buyers should read this detail page when purchasing, and please install according to the introduction on the detail page. Any loss caused by not installing according to the introduction on the detail page should be borne by the buyer. The seller does not provide warranty. A matching plug is needed for the light strip to use for a period. Single-color light strips need single-color plugs, and four-color light strips need four-color plugs for flash. Six-color light strips need six-color plugs for segmented jumping, and seven-color light strips need seven-color plugs for overall color change. With a remote control seven-color plug, you can choose single-color color mode and adjust brightness and speed. Three-color light strips have dual-color light beads on them, and the other color is bright together. For a period, a three-color plug is needed, and another common switch at home (not for sale) is needed. After connecting, turn the switch to change a color to stay on. Multiple sections in one area cannot be synchronized to change light.

The double-triangle watermark on the image is just the shop name and not the product brand.

One piece for 1 meter (supports customizing) options not listed as whole roll for retail, options marked as whole roll are sold in whole rolls, one roll is 100 meters and is not sold individually. The variety of light strip styles has incomplete labeling, and if there are any other requirements, you can contact customer service for support customizing. This link's light strip is 100 meters per roll, and if it is cut, it is not a quality issue and will not be exchanged or returned unless it is a whole roll that has not been cut. If the 100-meter roll is cut and there is no quality issue, it will not be exchanged or returned. Light strips are mainly sold in bulk, so they do not include any accessories. For outdoor or environments with moisture, the joints and tails need to be sealed with glue to protect against water infiltration. It is also not recommended to leave the light strip in water for a long time. Regular options are not recommended for use in wet environments, and it is recommended to use them for no more than four hours a day. For options that can be left on for a long time, it is recommended to use them for no more than ten hours a day. It is not recommended to use it for a long time or to operate it while it is powered. When hanging, it should be fixed about half a meter away and not pulled forcefully to avoid damage. The light strip should be installed on insulating materials and not on conductive materials, which could cause short circuits. It is not recommended to install it in conductive or flammable and explosive environments or in sealed environments. It should be installed in a well-ventilated and well-cooled environment. The light strip can only be connected to a single plug. The light strips with 220V have flickering when photographed, and if you need a plug without flickering, you can contact customer service for custom-made. The light strip cannot be used in aluminum grooves, as they cannot be ventilated and cooled. There is no warranty for use in aluminum grooves (except for the aluminum groove model). For models with adhesive backs, installation requires a distance to be added with glue to reinforce. The light strip can only be cut at the empty space in the roll, and the whole roll cannot be lit. It must be spread out and lit to test. If it is lit together, the temperature cannot be dissipated, which is easy to melt the middle. The plugs should be inserted into the center of the wires and not offset (if offset, it is easy to trip and cause damage to the plug and light strip). The light strip has positive and negative poles, and it will not light normally when installed. If you turn the light strip around and connect it to the plug, it will light up. The light strip needs to be connected to the matching plug to use, and if it is not matched or not connected, it may cause damage. Buyers should read this detail page when purchasing, and please install according to the introduction on the detail page. Any loss caused by not installing according to the introduction on the detail page should be borne by the buyer. The seller does not provide warranty. A matching plug is needed for the light strip to use for a period. Single-color light strips need single-color plugs, and four-color light strips need four-color plugs for flash. Six-color light strips need six-color plugs for segmented jumping, and seven-color light strips need seven-color plugs for overall color change. With a remote control seven-color plug, you can choose single-color color mode and adjust brightness and speed. Three-color light strips have dual-color light beads on them, and the other color is bright together. For a period, a three-color plug is needed, and another common switch at home (not for sale) is needed. After connecting, turn the switch to change a color to stay on. Multiple sections in one area cannot be synchronized to change light.