mineral oil non-silicon defoamer water-based oily industrial coating paint defoaming agent latex paint mineral oil defoaming

Model: DF-2753 Ingredients: Polyether/Silicone and others pH Value: 5-8 Appearance: Transparent/Light Yellow/Milky White Liquid Solubility: Easy to dissolve in water

Mineral oil non-silicone antifoam agentHas the characteristics of rapid foam elimination, high efficiency, long-lasting foam elimination, good economic performance; it can be dispersed in water to form a moderate stability emulsion; it is effective under both acidic and alkaline conditions; it is not based on silicone, thus gaining wide application.。

1. Strong foam-reducing ability, long foam suppression time.

2、High cost performance and good solubility

3、Suitable for various industries to eliminate and suppress foam

4. A supplier with high quality and low cost, with low addition amount.

1. Building coatings; 2. Public facilities, structural engineering, ACE coating; 3. Printing inks; 4. Adhesives. 5. Emulsion polymerization.。

1. Direct addition of the original solution, or adding in batches.

2. The amount of antifoaming agent can be 0.1-1% depending on the system, and the amount of addition should be determined according to the specific circumstances of the customer.

3. Before use, you can perform a small test to avoid any abnormal conditions.

Packing: The product is packed in 50KG, 120KG, and 200KG plastic drums.

Storage: This product is not a hazardous material, non-combustible, sealed storage in a cool, ventilated, dry indoor place. Before the end of use, use it each time.

The container should be sealed tightly. The shelf life is about 12 months at 25°C.

Transportation: The product must be sealed well during transportation to prevent moisture, strong alkalis, strong acids, and other impurities such as rain from mixing in.