110v-220v lingke 8806 three cutter head fully washable shaver usb charging electric men razor charging

                               Product Introduction

 Product Name: Upgraded Lingke Shaver Product Weight: 260 grams

 Product Model: 8806 Color Box Size: 18.6*9.8*6.8 inches

 Power: 4W Packaging Quantity: 80/case

  Applicable voltage: 5V (USB cable) Packing size: 56.5*38.5*52Gross weight21.5 kilograms

Set product weight: 300g

Set product size: 16*8*19

Set product outer box size: 66*42*61.5

Packing quantity of the set: 60 pieces

  Style 1: Basic Package (Body + Brush + Charging Cable + Instruction Certificate of Quality, only shaving function.)

       Please carefully check the style before placing an order, thank you!

  【Charging Method】

 1、Must use AC output USB/5V charging

2. Turn off the switch, push out the charging plug, and insert it into the power socket.
3. The switch must be turned off before charging.
4. When charging, the charging indicator light is on.
5. The standard charging time is 2 hours.
 【注意事项】

 Do not charge in areas where the rated voltage exceeds 240V, or it may cause a fault.

Do not charge for more than 24 hours consecutively, and do not charge when the temperature is below 0°C or above 40°C, as this may shorten the battery life.
Do not use water to wash the body, nor bring it into the bathroom, or it may fail.
When the body part is dirty, you can use a soft cloth to wipe it with neutral cleaner. Do not use alcohol or gasoline to wipe it.
When an abnormal situation occurs during the charging or use of the product (such as an unusual smell, temperature, or sound), immediately turn off the power and stop using it.

Proper use and maintenance of electric razors can not only achieve satisfactory shaving results but also extend the lifespan of the electric razor. When using, it is important to pay attention to the following aspects.

1. When installing the power supply, pay attention to the polarity of the dry battery or charger to prevent the motor from reversing, thereby damaging the stationary blade and the moving blade.
2. When shaving, the blade should be pressed tightly against the face and moved slowly, moving against the direction of beard growth to allow the beard to easily enter the holes. If you move with the beard, it will crush the beard, which is not conducive to the beard entering the holes.
3. Electric razor is not suitable for shaving long beard, so it is best to shave every 4 days. If the beard is very long, it should first be cut short with a trimmer or small scissors, and then shaved with an electric razor. If there is no trimmer or small scissors, the method of multiple sections should be used, first touch the skin with the fixed blade (grid cover) perpendicular to the beard, shave the beard shorter, and then proceed as in method 2.
4. When using an electric shaver with a trimming blade, it is necessary to keep the blade perpendicular to the face when moving it to ensure that the beard is shaved clean.
5. If a shaving stop occurs, turn off the power and restart the device. Once the motor rotates normally, continue shaving.
6. The fixed blade of an electric razor is very thin, and it should not be subjected to excessive pressure to deform or damage it.
7. For dry battery-powered electric razor, after use or if it has been left idle for a long time, the batteries should be removed to prevent moisture from entering and causing unnecessary corrosion damage. For razor powered by AC electricity, after use, the power should be turned off and the plug should be pulled out to ensure safety. For razor with a rechargeable battery, do not allow the battery to discharge too much. If the battery is low, charge it before using. If it has been idle for a long time, it should also be charged regularly (about every three months).
8. Regularly add a small amount of lubricant to the bearing parts to reduce wear. Non-wet electric razor, do not use water or volatile chemicals such as alcohol to clean. If the blade is not used for a long time, it should be coated with a thin layer of oil on the blade to prevent rust and damage to the blade.
9. After each use of the razor, use a small brush to clean away the hair and other contaminants, and do not allow the accumulation of contaminants, otherwise there will be a risk of motor jamming or transmission obstruction. At the same time, once the hair and skin grease solidify on the blade, it will affect the sharpness of the blade.

                              【Goods Receipt Notice】

    1. To ensure your interests, please inspect the transportation condition together with the courier personnel at the time of signing for. If the product suffers damage during transportation, please reject it directly. We will take full responsibility for compensation or replacement. If any issues of damage, defects, or missing goods are raised after signing for, we will not accept any responsibility.

 2. Please ensure that your mobile phone and other contact methods are available at all times. If the goods are returned due to personal reasons (such as the mobile phone being turned off, no one answering the phone, incorrect addresses, or unreasonable requirements for courier services), the store will not assume any responsibility. If the product or the packaging is damaged as a result, the store will charge a corresponding fee as compensation.

Goods Receipt Notice

 3. If there are any quality issues, please contact our customer service during business hours for a satisfactory response, thank you!