factory direct sales car polishing disc recovery disk imported sponge roundel waxing wheel polishing sponge ball 5-inch

【Usage Instructions]:

1:Suitable for waxing

2:Both pneumatic or electric polishing machines can be used

3:ProductWaxingTime,Suggested use1000–1500Translate/Division

4:ProductPolishingTime,Suggested use1500–2000Translate/Division

5:When cleaning the product,Only cold water is allowed15-25degree

To ensure the polishing effect, the vehicle must be thoroughly cleaned before waxing

Blackfor fine texture还原 spongeDisk, used in conjunction with polishing wax and mirror finish wax!

yellowForMedium-thick polishing sponge disc, can be used in combination with coarse wax and scratch wax!

Orange general-purpose car polishing and waxing service. Suitable for both solid polishing wax and liquid polishing wax!

Jujube red thick plate

 Product Introduction;

●Waxing, waxing can be divided intoHandmade wax coatingandMechanical waxingTwo methods: manual waxing is simple and easy to implement, while mechanical waxing is efficient. Whether using manual or mechanical waxing, it is essential to ensureEvenly apply the lacquer surfaceDuring manual waxing, first apply an appropriate amount of car wax onto the sponge (special waxing sponge), then apply it in a straight line in a specific sequence. Each application should overlap by 1/5 to 1/4 with the previous area to avoid missing spots and ensure even coverage. For mechanical waxing, apply the car wax onto the waxing machine sponge; the application process is similar to that of manual waxing.It is worth noting at the edges, corners, and edgesapplicationShould avoid exceeding the paint surface., and manual application is easier to control in this regard.
● Polishing. According to different conditionsCar WaxDescription: Generally applied after application5—10Just polishing is sufficient. During polishing, follow the principle of applying wax first, then polishing, to ensure a smooth finish.The vehicle dashboard is not contaminated<t)_POLISH_PROCESS_:_TASKS_> Polishing operations typically involve the linear motion of non-woven cloth, with appropriate pressure applied to remove any remaining wax.