wj528 steam cleaner car sauna machine high-pressure cleaning vehicle invisible car clothing film laminator foreign trade

The default shipping method is Yuntong Express. The standard package weighs approximately 6 KG; its dimensions are about 54*34.5*30.5 cm. If you have more than 10 units, you can contact customer service to arrange logistics shipping, and the shipping fee will be paid at receipt.

 Important safety instructions:

This device is an environmentally friendly electrical product that uses high-temperature steam for cleaning. Due to its unique operating mode, please be careful of the following points when using it:

·This device is not suitable for children. Please keep it out of reach of children. If there are children in the area where you use it, be especially careful.

·Please ensure the voltage is consistent, and do not block any nozzles or hoses before using this device.

·Please add an appropriate amount of water according to the scale on the measuring cup (≤1.5L). The addition of chemicals such as deodorants, fragrances, softeners, alcohol, or cleaners is strictly prohibited.

·The device emits high-temperature steam, with the steam temperature near the nozzle reaching over 100°C. Please do not wear safety helmets or direct it at people, animals, electronic devices, or any other objects that cannot withstand high temperatures during use.

·The steam emitted by this device, when blown onto cleaned objects, condenses into water droplets. Therefore, do not direct the device at switches, sockets, or electrical components of household appliances to prevent electric leakage or other accidents. When cleaning and sterilizing the interior of refrigerators or microwave ovens, and removing odors, it is necessary to turn off the power first.

·There are high-temperature components inside this device, so it is prohibited to turn on or disassemble the unit to avoid electric shock or fire.

·To prevent electric leakage, please do not immerse the device or power cords in water or other liquids.

·Do not use it directly to clean your clothes.

·When the device is used up or not used for a long time, or during cleaning or inspection, the power cord must be unplugged. Burning without water drying is strictly prohibited.

·If the Panini machine overheats, emits smoke, or has unusual odors, please stop using it immediately, unplug the power source, and contact the seller. The seller will arrange for professionals to inspect and repair the machine. Customers should not attempt to check or repair it themselves; it is also necessary to unplug the power plug before any repair.

II. Adding water:

• When using this device for the first time, please turn off the safety helmet counterclockwise, insert it into the funnel, and pour an appropriate amount of water into the machine according to the scale on the measuring cup (note: no more than 1.5L). After pouring the water, tighten the safety helmet.
• When refilling with water, please turn off the power and hold the steam switch until the steam is completely discharged, then remove the safety helmet. Note: The safety helmet cannot be removed until the steam is fully expelled.

Note: Wait for the device to cool down before adding more water again

III. Connecting power supply:
• Unplug the power cable, insert the plug into the appropriate power outlet, and press the yellow switch button on the main unit; at this point, the power indicator light on the main unit will turn on, along with the operation light.

• Please ensure that the power supply used matches the requirements specified on the device's nameplate and can provide sufficient power.

IV. Usage:
• The heating component of this device needs to be preheated before operation. After connecting to power, wait for about 10 minutes. When the yellow indicator light stops flashing, it indicates that the preheating is complete and the device can be used.

• Press the steam switch, wait for the steam to spray from the nozzle, and then you can begin the cleaning process.

• Ensure that the steam is released at a moderate flow rate.

5. End of usage:

To maintain the performance of this device and ensure it operates more efficiently and safely, please:

·Unplug the power cord and tie it neatly.

· It is necessary to wait until the attachment has completely cooled down before touching or cleaning it. Except for the body and power cord, the rest can be immersed in water for cleaning. During cleaning, please clear the hose connections and nozzles.

,

· Clean the device with a clean, soft dry cloth, and store it in a dry, cool place.