dea gti2 gti4 remote control 433mh gate garage door opener transmitter

Description:

1. Name: DEA remote control.

2. Type of programming: Programming using the receiver

3. Frequency: 433.3MHz, 433.92MHz

4. Code: DEA rolling code and Fixed code.

5. Number of channels: 2 or 4.

6. Battery: Include Battery

How is it programmed?

When a button is pressed, the controller transmits the radio signal and turns on the LED.

Indicates, in addition to the type of code used, a HCS rolling code-red LED (factory setting)

DIP SWITCH HT12-green LED;

D.A.R.T.DEA Advanced Rolling Transmission—alternating red/green LED

Change transmission code

Press keys T1 and T2. When the radio control LEDs turn on (for 10 seconds), wait until they

Flash to indicate the type of code set:.

1 flash per second = HCS rolling code

2 flashes per second = DIP SWITCH HT12

3 flashes per second = D.A.R.T.

Hold down Ti and use T2 to change the type of flash. Once the new code has been

Selected, hold down key T2 until the LEDs turn off (5 seconds)

Programming with receiver

<t_Receiver manual> for information

in the storage procedure.)

1. Open the gate opener and locate the programming button

Briefly, an LED will light up on the receiver P.C.B.; now

You have 10 seconds to carry out the next step

Please pay attention

This product is only suitable for older models of motors; new models are not compatible.