cigarette box no. 1 10 pcs 20 pcs one-piece two-in-one anti-pressure moisture-proof automatic cigarette box gas lighters

1.How to inflate correctly

1.Before inflating, use a small tool to hold the inflation core in place, and completely release any remaining gas inside to eliminate the pressure in the lighter cylinder;

2.Press the gas canister outlet vertically downward each time.5About a second or two, two to three times should be enough.

3.Please wait for 3 minutes after inflation is complete.5It will take about a minute to use, for example5If the fire still doesn't ignite after a few minutes, simply increase the adjustment valve a bit. (Note)+  -) Direction.

For more details, please refer to the following detailed description.

Special reminder: altitude1000In high-altitude areas above 1 meter, inflated windproof lighters can affect both ignition and use with matches. The reduction in ignition rate is significant; please choose windproof lighters with caution. It is advisable to use open-flame or kerosene lighters instead.

2.Instructions for using kerosene lighters:

Note: The new kerosene lighter does not contain fuel; you must refill it yourself. It is available at our store in the kerosene accessories section.

Motivation steps:

1. Open the engine cover;

2. Disassemble the movement;

3. Invert the device, remove the bottom cotton pad, or inject kerosene through the hole in the bottom cotton pad.

4. Once completed, insert the casing, and it can be used immediately.

5. It is acceptable to fill it to 80% capacity; it should not be too full to prevent overflow. Pay attention to safety when lighting for the first time, as there is a possibility of oil overflow leading to a fire in the entire device.

Special reminder: Dealers must not refuel lighters that have not been sold and not in use. First, refueling and burning will turn the cotton core black, making it look like an old lighter, which customers may not accept. Additionally, not using a refueled lighter will reduce its ignition rate, making it difficult to light later.

Important reminder: Rust inside the case is a common and normal phenomenon caused by residual chemical agents during surface processing. Additionally, in daily use, the case is often inserted and removed, causing friction. The rougher the internal structure, the better it helps secure the movement without excessive looseness. Therefore, there is no need to specifically beautify the interior of the movement. If the movement feels loose during use, please remove it and gently tap the bottom side of the movement. Then it will function properly again.

3. Charging lighter

Currently, the market offers two main types of rechargeable lighters: heating wire cigarettesighters and arc pulse lighters

1. The charging time for the lighter is approximately 2 hours. It is usually charged via a USB port, and can be used with phone charging plugs, car chargers, and computer USB ports. Some models also have a built-in USB port for direct charging.

2. Generally, about 2–3 packs are needed. It can be charged once the battery runs out; it’s simple, convenient, and fast.