1. Basic Parameter Information
1. Rated specifications: Maximum power 24W
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Input: AC 100-240V standard power supply, compatible with household standard outlets
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Output: DC12V, maximum output current 2.0A
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Certification: Complies with CE and RoHS certifications, meeting safety standards for regular foreign trade and domestic home improvement industries.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The external dimensions are approximately 7.2×7.2×1.3 cm; it is compact in size and can be hidden for embedded installation.
2. Core Work Characteristics 💡
1. Operation method: Press the control. Tap the appropriate surface twice to turn on the light, and tap again twice to turn it off. The surfaces that work well for this tapping include mirrors, wooden boards, and ceramics. It will function properly in bathroom mirrors and wooden cabinets scenarios as well.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Energy-saving mechanism: It has a built-in feature that turns off automatically after 1 hour. Even if you forget to turn off the light manually, it will shut down automatically after one hour, reducing power consumption during idle state.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. It comes with a national standard two-pin plug, and the output configuration includes an SM plug-and-play connector. The red and black output terminals can be used for low-voltage LED strips, mirrors, and defogging films, making wiring and removal easy.
III. Applicable Scenarios
1. Bathroom sector: smart mirrors and makeup mirrors in the bathroom, capable of synchronously controlling the mirror light strips + anti-fog film;
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Cabinet lighting: built-in light strips in wardrobes, cabinet lights, and hidden lights in wine cabinets;
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Other small spaces: concealed lighting renovations for display cabinets and custom cabinet systems for homestays.
IV. Precautions for Installation and Use ⚠️
1. Installation location: The device should be placed as hidden as possible in a mirror cabinet or within a sealed space inside the cabinet. The surface where it is struck must allow vibrations to reach the sensor. Do not wrap the sensor with thick sponge material, as this will reduce its vibration sensing sensitivity.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Power control: The total power consumption of the LED strips and de-mist accessories connected to the rear end must not exceed the upper limit of 24W, to prevent overload and damage to the switch;
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Environmental Adaptation: Ensure proper moisture-proof treatment for the plug section in the bathroom facilities, and try to place them deep in a dry cabinet away from direct water spray.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. If the sensing is slow, you can slightly adjust the position of the switch, and select a material with better rigidity to transmit the tapping vibration.
