dental intelligence agal-agal blender dental special touch screen can be reserved for 11l large capacity

Voltage: 110V 50Hz/
220V 60Hz
Rated Power: 1300W
Heating Power: 1200W
Capacity: 11L
Dimensions: Length 360 * Width 330*
5.80 meters high

Packaging dimensions: (52 cm * 45 cm * 68 cm). Total weight: 30 KG
Chinese and English can be switched, automatic mode.

Main advantages

The device features a touch screen, with simple and convenient program settings. It operates through intelligent control without any manual intervention, has a fast melting rate, minimal temperature difference, and leaves no residue after material discharge.

IV. Operation Steps

1. Cut agar into small pieces no larger than 2 cm and pour it into the pot; if the pieces are too large, it may cause incomplete melting.

Connect to power using a random power cord, turn on the power switch, and the screen will light up.

2. Click “Start” on the interface, and the machine begins to operate.

3. No manual intervention is required throughout the process. When the agar melts to the usage temperature, the alarm sounds, and the temperature remains constant.

4. During the melting process of agar, the stirring can be turned off by pressing “stirring stop” for easy addition of agar temporarily.

5. A set time can be configured. Before leaving work, cut agar into pieces and place them in a pot. Turn on the power switch; do not press the start button, and it will function.

The time setting now runs automatically. Remember, turn off the power switch if you don’t need it to start automatically the next day!

6. If there is a sudden power outage during the cooling process, after restarting, press the “Continue” button. The program will continue running from the breakpoint, eliminating the need to start over and waste time.

7. Machine operation process: start heating — begin stirring — reach set temperature — fan activates for cooling — reach

Constant temperature—alarm sound activates—constant temperature.

8. When the agar in the pot is used up, press the stop button and turn off the power switch.

9. The display will automatically turn off after 10 minutes without any operation, but the program will continue running. Press the screen to wake it up.