Product Analysis of Three-Line RGB LED Module (IC‑2811)
📌Basic Parameters
- Power supply: DC12V, three wires (power+, GND, signal)
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Driver IC: 2811, built-in color-changing IC
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Enclosure: Transparent injection molding, IP6X waterproof, suitable for semi-outdoor use
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Light beads: 3 focus lens light beads
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Connection: Male and female plugs at both ends can be connected in series for three-wire signal transmission
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Installation: The back features a 3M foam adhesive, allowing adhesive application without drilling holes
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Certification: CE, RoHS
✅Key Selling Points
1. Equipped with a 2811 color-changing IC, supporting various dynamic effects such as running effect, flowing effect, gradient effect, and color switching; the three-wire signal wiring is simple.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. IP6X integrated injection molding for waterproofing, dust protection, and rain resistance; can be directly used on door fronts and semi-outdoor light boxes
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Optical concentrating lens, focuses light, ensuring uniform and vibrant illumination in the lamp box
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Male and female connectors connected in series, no welding required, convenient for mass advertising project construction
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. It comes with 3M adhesive on the back; simply tear off and stick it on, no drilling required, and installation is efficient.
<t_XXXXXXXXX> <t_XXXXXXXXX>
6. DC12V low-voltage power supply, safe to use
📍Applicable Scenarios
Colorful glowing signs, dynamic RGB advertising light boxes, storefront lighting, window display decorations, commercial lighting projects
⚠️Usage Instructions
1. Power supply is 12V DC; direct connection to 220V mains power is not allowed. It requires a controller compliant with the 2811 protocol plus a 12V switching power supply.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Clearly distinguish the power positive, ground, and signal wires in three-wire wiring; incorrect connection will result in no effect.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The series connection length must be within the specified range to prevent signal attenuation and voltage drop.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. The surface should be clean and flat, ensuring the adhesive is secure.
