DC12V Yellow-White Blinking LED Warning Module – Product Analysis
📌Basic Parameters
- Power supply: DC 12V, black output wire, supports multiple parallel connections
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Light beads: 12 LED lenses, a combination of yellow flash and white constant-on, equipped with a flash IC. Flash automatically when powered, no external controller required
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Case: Square black injection-molded shell, transparent lens mask, with mounting slots on the sides
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Function: Alternating yellow and white flash warning effect, highly visible and highlighted
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Protection: Dust and moisture-resistant injection molding structure, suitable for semi-outdoor use
✅Key Selling Points
1. Built‑in Yellow‑White strobe flash; no additional controller required. Operates directly with a 12V power supply and is easy to install.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Yellow-white color combination with warning light effect; strong penetration, highly recognizable both during the day and at night
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The square injection-molded housing is sturdy and impact-resistant; the transparent lens focuses light, ensuring uniform illumination.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. DC12V low voltage, safe; supports multiple modules in parallel to meet large-area warning requirements
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. Dust and moisture-resistant, suitable for semi-outdoor environments such as vehicles and advertising signs
📍Applicable Scenarios
Truck and construction vehicle warning lights, road safety signage, flashing advertising signs, side warning indicators for construction machinery, emergency warning light boxes
⚠️Usage Instructions
1. Only supports DC12V input; direct connection to 220V high-voltage mains power is strictly prohibited. A 12V switching power supply is required.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. It is recommended to apply waterproof treatment to the connectors; they should not be exposed to water for long periods.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The parallel total power must not exceed the rated power of the power supply
