DC12V COB injection-molded LED advertising module – Product Analysis
📌Basic Parameters
- Power supply: DC 12V, red and white wires, supports multiple modules in parallel
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Light source: COB surface light source, large elliptical light-emitting surface, high brightness and uniform light output
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Enclosure: White injection-molded unit, transparent protective mask, screw mounting holes at both ends
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Process: Injection molding sealing, dust and moisture resistant, suitable for semi-outdoor advertising projects
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Available lighting colors: warm white, pure white, red-green, yellow-blue, pink-purple, and multicolor
✅Key Selling Points
1. The COB surface light source emits light uniformly across the entire surface, with no point-like lamp bead spots; the light box has full brightness.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Integrated injection molding sealing structure, resistant to dust and moisture; suitable for semi-outdoor storefront signs and light boxes
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. It comes with mounting holes, making installation easy with screws; red and white wires allow multiple modules to be connected in parallel for large-size advertising displays
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Rich color options: warm white / cool white / red and green / yellow and blue / pink and purple / multicolor, to meet various signage color schemes
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. Operates at 12V low voltage, paired with a switching power supply; the advertising system is safe and stable.
📍Applicable Scenarios
glowing signs, advertising light boxes, shop signage, signboards, DIY advertising decorations
⚠️Usage Instructions
1. It is powered by only DC12V; it is strictly prohibited to connect directly to 220V high-voltage mains power. A 12V switching power supply must be installed.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. It has moisture resistance, but should not be soaked in water for long periods; waterproof treatment must be applied at outdoor wiring locations
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The parallel total power cannot exceed the rated power of the power supply
