tile leveling device positioning paving leveling device sub-type tile base fixing tool factory in stock supply 瓷砖找平器定位铺贴调平器契子型瓷砖底座固定工具厂家现货供应

Introduction to Tiler

1.How to Use and Precautions for Tile Leveling Tools

2.Standard operating procedures

1. Preparation PhaseClean the tile surface to ensure it is free of dust and scratches, then select the leveling tool specification based on the tile size.5.
2. Installation and fixationInsert the leveling base into the gaps between tiles. The steel pin clip must be positioned vertically against the edge of the tile to prevent displacement.1.
3. Leveling operationRotate the leveling adjuster cover until it aligns with the adjacent tiles. Use a 2-meter straightedge to verify that the levelness error is ≤3mm.35.
4. Removal timing5 hours after laying (before the cement first sets), remove the leveling tool to prevent any residue from affecting the joint sealing.5.

Key Precautions

• Trial Laying RecommendationsFor the first use, it should be tested in a small area (such as 1㎡), and large-scale construction can be carried out only after getting familiar with the tool.1.
• Crack ControlAfter laying, the void rate must be checked; the area of any single void shall not exceed 10%, and the overall void rate shall be ≤5%.3.
• maintenanceAfter each use, thoroughly clean the steel needle clip to prevent rust caused by cement mortar residue.1.