NT‑LVC3O0W‑24V Ultra-Thin LED Switching Power Supply – Product Analysis
📌Basic Parameters
- Model: NT‑LVC300W‑24V
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Input: AC180‑265VAC 50/60Hz wide-voltage mains power
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Output: DC2 4V, 1 2.5A, 300W
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Case: gray, ultra-thin, long strip-shaped iron casing with large, longitudinal heat dissipation holes; one end has a red AC LN input terminal, the other end has a blue DC output terminal; the casing is secured with screws.
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Certification: CE certification, indoor power supply, protection level IP20
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Installation: The casing has pre-drilled screw holes, supporting wall-mounted or embedded installation.
✅Key Selling Points
1. Ultra-thin and elongated body, suitable for embedding installation in narrow spaces such as light boxes, ceiling panels, cabinets, and illuminated signs
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. 180–265V wide input voltage; operates reliably under stable grid voltage fluctuations, suitable for mains power in most countries
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Large-area perforated cooling holes, high cooling efficiency, low temperature rise during long-term full-load operation
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Red-Blue separation terminal blocks: red for AC input, blue for DC output; clear distinction, easy to connect without errors, and convenient for installation.
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. 300W high power output, strong load capacity, suitable for LED light strips, advertising modules, and lightbox projects
<t_XXXXXXXXX> <t_XXXXXXXXX>
6. Industrial-grade construction, suitable for commercial lighting projects
📋 Applicable Scenarios
LED soft light strips, COB light strips, advertising light boxes, illuminated signs, cabinet lighting, commercial interior lighting projects
⚠️Usage Instructions
1. Designed specifically for IP20 indoor use; cannot be used directly in the outdoors exposed to rain. For outdoor use, a waterproof casing is required.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Clearly distinguish the communication input terminal (red terminal) from the DC 24V output terminal (blue terminal); reverse connection is prohibited.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. During installation, ensure the heat dissipation holes are not blocked to maintain proper air circulation
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. It is recommended to reserve a 10–20% buffer for actual load power; do not operate at full capacity for long periods to extend the power supply lifespan.
Update time：20260902142815
