24v 2835 led soft light belt 120led 24V 2835 LED软灯带120LED

2.4V 2.835 LED flexible light strip - Product Analysis

📌Basic Parameters

- Light beads: 2,835 SMD light beads, 120 LEDs/m
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Voltage: DC24V
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Power: 10W/m
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Board width: 8mm
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Circuit structure: six LEDs and one resistor
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Copper substrate: 1818 copper sheet, excellent electrical conductivity, low voltage drop
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Specifications: 1 roll is 10 meters long, FPC flexible circuit board, with self-adhesive backing on the back, supports cutting at marked points

✅Key Selling Points

1. Low-voltage power supply of 2.4V; excellent voltage drop control over a distance of 10 meters; good brightness consistency across the entire roll.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. 120 light beads per meter at 2835, high bead density, uniform lighting, no light spots
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Design of a six-light and one-resistor circuit; the circuit is stable, and damage to a single light bulb does not affect the operation of the entire light strip.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Thickened copper board substrate, with strong conductivity, low heat generation, and greater durability for long-term use
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. 8mm narrow panel width, suitable for installation in tight aluminum channels, cabinets, and cabinet gaps
<t_XXXXXXXXX> <t_XXXXXXXXX>
6. Flexible FPC board, bendable, easy to install with adhesive backing; 10 meters per roll, suitable for home decoration and small-to-medium size projects

📋 Applicable Scenarios

Cabinet and wardrobe lighting, ceiling ambient lights, display case lighting, interior decoration illumination, light boxes, concealed lighting in cabinets

⚠️Usage Instructions

1. Use a DC2 4V matching switch power supply for power supply; direct connection to 220V mains electricity is strictly prohibited.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Cut according to the cutting marks on the board; do not cut randomly at areas not marked.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The base surface to be bonded with adhesive must remain clean and dry to ensure a strong bond.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Apply power to the 10-meter continuous roll. It is recommended to calculate the voltage drop; for long distances, it is advised to supply power at both ends.
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. For indoor use; for outdoor use, a matching pipe system is required for waterproof protection.