authentic adhesive up to e7000 glue ornament diy glue fabric diamond painting high strength adhesive factory direct supply 正品粘力达E7000胶水饰品diy胶水布料钻石画高强度粘合剂厂家直供

【E7000 Technical Data】

Appearance: Transparent semi-fluid material

Solid content: 28%-35%

Hardness after curing: 65–80A

Surface drying time: approximately 3–6 minutes

Curing time: 24–48 hours

Gel: Fully transparent, soft gel; semiconductor

Characteristics: does not turn white, does not become brittle, does not turn yellow, does not become hard, and has a very mild odor

Shelf life: 2 years

Concentration comparison: E7000 (3600 CPS)

E8 00 (2 80 CPS)

Purpose<t_XXXXXXXXX> <t_XXXXXXXXX>

E7:000 adhesive can bond with a wider range of materials. It is suitable for metals, glass, ceramics, stone, bamboo and wood, fabrics, leather, PE, PP, PVC, ABS, nylon, sponge, films, textiles, electronic components, plastics, rubbers, fibers, and paper. It is used for attaching phone frames, LCD screens, middle frames, borders, and stands.

Usage Instructions:

1. Please read the product instructions carefully before use

2. Before applying on a large scale, please conduct a small-scale trial first.

3. Make sure the surface being adhered is clean and dry

4. The operating temperature should be between 18–32 degrees Celsius.

5. After opening the product, please remove any residue on the lid needle promptly to facilitate reclosure.

6. Wait for 2–3 minutes, then align the two materials to be bonded and apply slight pressure.

7. It can be left straight for several hours; the bonding strength is achieved after 24–48 hours.

8. When the product is not in use, seal the bottle cap to prevent the adhesive liquid from curing after coming into contact with air

E7000 needle packaging specifications:

For overseas orders, an MSDS test report from the Technical Supervision Bureau can be provided.