8pc set repair tools tire repairing tools set vacuum tire for car motorcycle fast tire repair strip

Yi He Rubber industry 14yr.

Contacts Liu Xiaofeng Chat

Mobile 86-13605823616

E-mail 760283468@qq.com

WeChat 13605823616

Click to Contact Yiwugo official customer service for International sourcing.

Yiwugo official customer service X

Whatsapp:

Email： yiwubuy@yiwugo.com

Description

material: metal

number of kits: 8

scope of application: vehicle foundation maintenance

product packaging: card

net weight: 0.1kg

name: 8pc tire repairing tools set

scope of use: emergency repair of tires such as cars, bicycles, battery cars, etc.

model: 8pc-1

weight: 0.15kg

set quantity: 8

item no.: 8pc-1

main downstream platforms: ebay, amazon, wish, aliexpress, independent

major sales areas: africa, europe, south america, southeast asia, north america, northeast asia,

whether cross-border export is exclusively available: yes

Product Name: 8Accessory tire repair tool set

Packaging Quantity:130 sets/case

Weight:1.45 kg per box

Outer box dimensions:49 * 27 * 49 cm

8pc-11

QQ20260424-123050

8pc-1-2

undefined

Instructions for the correct use of rubber strips:
During tire repair, if air leakage is detected, please confirm the following points:
1. Mark the punctured area of the tire, and remove the puncture tool.
2. Use a tire repair probe to determine the direction of the hole penetration, then insert it along the direction of the hole to remove dust and debris inside.
3. Cut one end of the rubber strip into an inclined shape and insert it into the hole at the front of the plug tool, ensuring that the lengths of the rubber strips at both ends are roughly equal.
4. Insert the pin with the rubber strip into the tire along the hole, ensuring the strip is inserted to 2/3 of its length (to ensure the cold patch strip penetrates through the tire body and prevents it from sliding out after inflation), then rotate the pin by 360 degrees before removing it.
5. Cut off the tire patch strips that remain outside the tires.

Precautions:
1. Use a probe to determine the direction of the hole, so as to ensure that the insertion direction and position of the rubber strip match the penetration direction of the nail hole. Otherwise, air leakage may occur. For example, if the angle between the hole direction and the tire tread is 50 degrees, the probe and insertion needle should also be operated along this slope.
2. After ensuring the rubber strip is sufficient to penetrate the tire, rotate the strip plug tool by one full turn (360 degrees) and then remove it. Make sure the rubber strip compresses the hole and forms a rotating knot inside the tire to prevent air leakage.
3. If it is a deep diagonal hole wound, ensure the tape length is sufficient so that the tape can penetrate the tire.