zhhanlida factory direct sales e8000 transparent powerful glue repair mobile phone screen ornament stick-on crystals diy handmade ZHANLIDA工厂直销E8000透明强力胶水修补手机屏幕饰品贴钻DIY手工

E-8000 Diamond-Insertion Special Needle Glue

Specifications: 3ml/1.5ml/2.5ml/50ml/110ml

【【Scope of Application】 Fully transparent imported adhesive, available in two sizes and specifications, packaged in blister format for easy shipping and transportation. It is not easily damaged, ensuring good quality retention.The duration is longer, and the needle design is easy to use, making it suitable for various industries. It is applicable to handcrafted items, crystal, diamond beads, bead bonding, watches, accessories, headwear, DIY phone cases, and other repairs. With its unique needle hole design, even complex and small parts can be handled accurately.

【Nature】This glue is environmentally friendly, completely transparent, and does not damage the material. It is particularly suitable and very convenient to use.

【Advantages】The glue has superior quality, high environmental protection, attractive packaging, and is easy to use.

Typical Characteristics and Applications: 1. Specialized bonding with water drills 2. Repairing small ceramic and wood figurines 3. Replacing broken pieces on damaged cups 4. Assembling handcrafted designs 5. Repairing garden and courtyard statues 6. Fixing cracks and fissures in wooden frames 7. Restoring damaged edges 8. Filling nail holes and drill holes 9. Adhering ceramic parts to wood or metal, as well as to concrete 10. Can be used in busy traffic areas as a protective layer for contact surfaces 11. Resistant to acids and alkalis; suitable for use in acidic or alkaline environments (such as salt water or sulfuric acid) as a corrosion-resistant coating 12. Electrical insulation: Offers excellent dielectric insulation and resistance, making it ideal for electronic equipment 13. Non-flammable 14. Other: Highly impact-resistant; does not shrink, burst, or solidify during the process, and does not drip. After curing, it can be polished, ground, filled, lightly hammered, drilled, and can be coated with most paints and pigments. It can be molded into any shape to replace damaged or missing small pieces. Can be applied on horizontal and vertical surfaces without dripping. Easily matches colors; compatible with powder coloring agents, most aqueous coloring agents, and food dyes.

【E8 00 00 Technical Data】

Appearance: Transparent semi-fluid material

Solid content: 3.3%-4.5%

Hardness after curing: 78-98A

Surface drying time: approximately 3 - 6 minutes

Curing time: 24–48 hours

Gel: Fully transparent, soft gel; semiconductor

Characteristics: does not turn white, does not become brittle, does not turn yellow, does not become hard, and has a very faint smell

Save: Save at 10°C to 30°C

Concentration Comparison:

B-6000 (3,500 CPS)

B-7000 (2,800 CPS)

E 8000 (3,000 CPS)

Usage instructions and precautions

1. Read the instruction manual before use. It can only be used in a well-ventilated environment. The bonding surface must be clean, dry, and free from dust. Roughen the surface before use to ensure strong bonding. It can be used between 10°C and 32°C; optimal performance is achieved at temperatures between 21°C and 29°C. After curing, the adhesive can withstand temperatures ranging from -40°C to 66°C. Conduct a small-scale test before official use.

2. Apply it directly to the surface to be bonded, press firmly down. It begins to thicken after about two minutes and starts to solidify after 10 minutes. To achieve higher strength, allow the bonded component to dry for 24–72 hours. The curing time may be longer at lower temperatures and shorter at higher temperatures. A handheld hair dryer can be used to accelerate curing; set it to a low temperature setting and avoid direct contact with the glue.

3 can be removed with acetone or turpentine for wet glue. Once cured, the material can be cut off or scraped away using tools.

4. If this universal adhesive is used for bonding fabrics, do not dry clean the fabrics.

5 This universal adhesive is not recommended for bonding foam polystyrene, polystyrene, polyethylene, and polypropylene plastics.

Storage method: Store at temperatures between 10 and 27°C. Freezing/thawing: Allow the product to reach room temperature before opening the container.

Product image reference

Image of glue packaging specifications

15 ml: 100 pieces per box, 1200 pieces per case

50ml: 15 units per box, 360 units per case

110 ml: 12 units per box, 120 units per case

Recommended glue of the same type (click on the image to go to the link)

A glimpse of production equipment