D40 LED Signage & Light Strip | Product Analysis
📌Basic Parameters
- Model: D40
<t_XXXXXXXXX> <t_XXXXXXXXX>
- LED beads: 2,835 SMD
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Voltage: DC12V
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Power: 6W/m
<t_XXXXXXXXX> <t_XXXXXXXXX>
- LED bead density: 40 LEDs/m
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Light flux: 27–29 lm per lamp bead
<t_XXXXXXXXX> <t_XXXXXXXXX>
- PCB board width: 6.6mm
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Cutting specifications: four lights and one cut, cutting unit 100mm
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Illumination angle: 120° wide-angle illumination
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Structure: copper foil circuit, red adhesive, flexible and bendable, suitable for application inside advertising signs
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Application: Acrylic illuminated signs, storefront labels, low-voltage light strips for LOGO backlighting
✅Key Selling Points
1. Four lights and one cutting unit (100mm cutting unit), flexible cutting capability, suitable for advertising signs of various sizes, easy to install, and reduces material waste.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. 2.835 high-brightness LED beads, 27–29 lumens per unit, 120° wide light emission angle, uniform light distribution, no dark areas or light spots within the display area.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. 6.6mm narrow panel design, suitable for small mini light signs; lighting can also be installed in tight panel spaces.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Low-voltage power supply of 12V, ensuring safety; comes with strong adhesive, allowing direct application upon tearing, resulting in high installation efficiency.
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. Thickened copper foil conductive layer, excellent voltage drop control, good brightness consistency at long distances, suitable for commercial storefront projects.
⚠️Usage Instructions
1. It must be used with a DC1 12V power supply; direct connection to 220V mains power is prohibited. The power supply should have a 20% margin for capacity.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. It can only be cut at the marked cutting points; cutting at other locations will damage the circuit.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Clean the dust and oil stains inside the word shell before pasting to ensure the adhesive bond is strong.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. These are indoor lighting strips. The advertising sign cases must be protected against water, and should not be exposed to water directly outdoors.
<t_APPLICATION SCENARIOS>
Acrylic illuminated signs, stainless steel signs, resin signs, storefront signage, backlit corporate logos, supermarket signage, exhibition hall advertising signs.
Update time：20260906104540
