S42 Specialized LED Strip for Advertising Signs | Product Analysis
📌Basic Parameters
- Model: S42
<t_XXXXXXXXX> <t_XXXXXXXXX>
- LED beads: 2,835 SMD
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Input voltage: DC 12V
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Power: 10W/m
<t_XXXXXXXXX> <t_XXXXXXXXX>
- LED bead density: 4.2 LEDs/m
<t_XXXXXXXXX> <t_XXXXXXXXX>
- PCB board width: 6.6mm
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Cutting specifications: three lights and one cut, cutting unit 7.1.3mm
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Illumination angle: 120° wide-angle illumination
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Physical structure: Special-shaped wave-shaped flexible PCB, copper foil conductive circuits, red strong adhesive, can be bent freely
✅Key Selling Points
1. 42 LEDs per meter, high-density light beads; small spacing between lights results in dense illumination. The lighting inside the advertising characters is uniform, reducing dark spots and shadows, and the surface brightness of the illuminated characters is more consistent.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. Three lights and one cut (7.1.4.3mm cutting unit); the cut particles are smaller, suitable for various sizes and irregular advertising signs. The lighting distribution at edges and corners is more flexible, reducing material waste.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. 6.6mm ultra-narrow board PCB can fit into the narrow housing of mini light signs, addressing the issue of insufficient internal space and poor wiring in such small sign housings.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Low-voltage power supply of 12V, safe for installation; comes with red adhesive, allowing direct pasting on the inner wall of the letter case by removing the base adhesive, resulting in high installation efficiency.
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. Thickened copper foil wiring offers excellent conductivity, minimal voltage drop over long distances, and small brightness variation at the start and end of the entire light strip—suitable for commercial storefront projects.
<t_XXXXXXXXX> <t_XXXXXXXXX>
6. Wavy special-shaped plate body with excellent bending performance; it bends along the curvature of the character shell without easily damaging the wiring.
⚠️Usage Instructions
1. It must be cut at the cutting points marked on the drawing; cutting at non-cutting areas will directly burn out the light strip.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. It is suitable only for a DC power supply of 12V; direct connection to 220V mains power is strictly prohibited; the power supply selection should include a 20% margin.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Before pasting, make sure to clean the dust and oil residue from the inner wall of the backing, to ensure the adhesive bond is strong and prevents peeling later on.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. The product is an indoor-type light strip. When used on outdoor storefronts, the housing of the illuminated characters must be fully waterproof and sealed, and the light strip itself should not be exposed to rain or water.
<t_APPLICATION SCENARIOS>
Acrylic illuminated signs, stainless steel precision signs, resin signs, storefront signage, backlit corporate logos, retail branding, exhibition hall advertising signs, and various small mini-advertising projects.
Update time：20260906104525
