6113 LED Injection Molding Module | Product Analysis
📌Basic Parameters
- Model: 6 1 3
<t_XXXXXXXXX> <t_XXXXXXXXX>
- LED beads: 2,835 SMD
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Size: 61×13mm
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Single cell power: 1.5W
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Voltage: DC12V
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Enclosure: White injection-molded waterproof casing with lens focusing design, includes output connection wires, suitable for series connection and assembly
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Protection: Injection molded casing, suitable for outdoor signage with advertisements
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Installation: Pre‑installed mounting holes; secured with screws, or can be adhered using adhesive.
✅Key Selling Points
1. The spotlight lens design provides strong light penetration, high brightness on the illuminated characters, and excellent visibility from a distance.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. White integral injection-molded casing with good protection properties, moisture and dust resistance, ensuring stable operation for outdoor signage.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. Specifications: 6.1×1.3 mm, 1.5 W power; single module provides sufficient brightness, with large spacing between lighting units, reducing the number of modules required and lowering construction costs.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Equipped with terminal connections, capable of series connection, easy to wire, convenient for engineering wiring; includes mounting holes for secure fixation with screws.
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. 2.835 LED beads, with stable light effects, good heat dissipation, low degradation after prolonged operation, and reliable lifespan for commercial applications.
⚠️Usage Instructions
1. The power supply is DC12V DC; direct connection to 220V mains electricity is prohibited. A margin of over 20% is reserved for the power output.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. The number of series connections should not exceed the load capacity of the power supply to avoid voltage drop, which could cause a decrease in brightness at the rear.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The connection points for outdoor use must be treated with waterproof and insulating measures to prevent water ingress and oxidation.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Install the fixing mechanism to ensure the module adheres tightly to the back panel of the case, which facilitates heat dissipation; do not place it in a suspended state.
<t_APPLICATION SCENARIOS>
Acrylic illuminated signs, storefront signage, advertising labels, stainless steel signs, supermarket and shopping center logos, outdoor engineering advertisements.
Update time：20260906105228
