PX24506 DMX512 DECODE
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Channel: 3-channel RGB, up to 3A per channel, total current 9A
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Power supply: DC12~2.4V
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Power limits: 12V up to 108W; 24V up to 216W
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Signal standard: DMX5 1.22/1.990, 256-level PWM dimming
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Address setting: The DMX starting address is manually configured using a 10-digit DIP switch.
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Indicator light: A green signal indicator light for the signal, turns on when a signal is received
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Working temperature: 0~50°C
<t_XXXXXXXXX> <t_XXXXXXXXX>
- Enclosure: black plastic casing with screw-mounted terminals
✅ Terminal definition
1. DMX IN (Signal Input): GND, D+, D-, connected to the DMX master control signal
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. DMX OUTPUT: GND, D+, D-, the DMX signal is connected in series to the next decoder
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. U-IN power input: V+, V-, connected to a DC 12–24V DC power supply
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. OUTPUT LIGHT OUTPUT: V+, R, G, B, NC; V+ connects to the positive terminal of the light strip, while R/G/B connect to the negative terminals corresponding to the RGB colors.
✅Key Selling Points
1. Standard DMX5.12 protocol, widely used for stage lighting and engineering illumination, supports multi-unit cascade expansion
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. 3-channel RGB output, 256-level grayscale dimming, smooth color transition
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. The DIP code settings define the address; no software is required, and on-site configuration is simple.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. Supports signal relay output; multiple decoders can be connected in series to reduce wiring requirements
<t_XXXXXXXXX> <t_XXXXXXXXX>
5. Wide voltage DC12–24V is compatible with most RGB LED strips, modules, and wall wash lights
<t_XXXXXXXXX> <t_XXXXXXXXX>
6. The signal indicator light allows quick assessment of communication status, making troubleshooting easier
✅Applicable Scenarios
Stage lighting, KTV bar ambient lights, building illumination, RGB soft light strips, LED modules, advertising landscape lighting
✅ Usage Instructions
1. Always disconnect the power before wiring, and ensure the positive and negative terminals are connected correctly; otherwise, the device may be damaged.
<t_XXXXXXXXX> <t_XXXXXXXXX>
2. The total load power must not exceed the rated limit; for high power, it is recommended to add an additional power supply.
<t_XXXXXXXXX> <t_XXXXXXXXX>
3. It is recommended to use shielded twisted pair for the DMX signal line to prevent interference over long distances.
<t_XXXXXXXXX> <t_XXXXXXXXX>
4. The load per channel shall not exceed 3A
Update time：20261006114141
