This lithium battery brushless screwdriver features a high-performance brushless motor, with sensitive impact response and stable torque output, suitable for high-strength screw removal and installation tasks.
The device is equipped with a 360° circular high-lumen shadow-free light, which uses circular lighting to eliminate shadows. In low-light environments such as device casings, ceiling cavities, and backlight corners, it provides clear illumination at work areas.
The entire device features a slim design, along with a laser engraving and anti-slip ergonomic handle. The anti-slip texture on the handle covers the gripping area, providing sufficient friction for prolonged handling tasks.
A dual-bearings concentric shaft structure results in minimal movement at the output end during operation, reducing the likelihood of thread slippage and wear, and enhancing the stability of screw alignment operations.
1/4 inch hex quick-change head, tool-free fast removal and installation head; directly compatible with all common hex heads on the market, making head replacement convenient.
21V lithium battery high-voltage platform, paired with a large-capacity battery pack, enables wireless operation without being restricted by power lines. It can be used flexibly in factory workshops, construction sites, and outdoor environments.
2. Product Advantages
Compared to traditional brushless motors, brushless motors eliminate the friction loss caused by carbon brushes, result in lower heat generation, effectively extend the motor's service life, and cause less vibration during operation.
360° light source with no shadow, which does not block light due to the holding position. It can illuminate screw locations from multiple angles and is suitable for work in confined spaces.
Quickly replace the hex head, as the head removal and installation process is simple. For batch assembly tasks involving frequent head replacements, this can effectively improve operational efficiency.
The device is compact and small in size, allowing it to fit into narrow spaces such as ceiling gaps and equipment cavities, and access screw locations that are difficult for ordinary tools to reach.
The dual-speed settings can be switched between low and high speeds. Low speed is ideal for tightening precision screws, while high speed is suitable for quickly removing rusty or stuck screws, meeting various operational needs.
The large-capacity battery pack offers greater endurance. Combined with a quick-disconnect battery structure, it allows for the rotation of spare batteries, reducing the downtime caused by charging delays.
III. Product Applications
Furniture custom assembly for entire house: cabinet bodies, wardrobes, display cabinets – mass production of screw fastening and disassembly.
Electrical equipment maintenance: repair and maintenance of distribution boxes, control cabinets, and mechanical and electrical equipment enclosures via screw removal and installation.
Construction site for renovation: mass screwing work using light steel beams, ceiling components, and gypsum boards.
Industrial assembly work: assembly of hardware components and small equipment, as well as the disassembly and reassembly of standard screws in bulk.
Outdoor engineering scenarios: outdoor billboards, maintenance of screws and fastening for small photovoltaic mounts.
DIY Handcrafting: Assembling various handmade devices using screws to secure small components.
Suitable for various standard hex bits; does not support continuous heavy drilling operations on hard materials.
4. Target Audience
Furniture customization, furniture installation, and after-sales service professionals.
Electricians, mechanical and electrical equipment maintenance workers, equipment maintenance technicians.
Staff for renovation construction and ceiling beam installation.
Workers in the processing plant assembly position.
Self-employed businesses use it for the assembly, disassembly, and maintenance of shelves and display cabinets.
Engineering outsourcing installation and maintenance team.
Enthusiasts of handmade DIY.
5. Usage Instructions
Battery installation: Push the fully charged lithium battery pack into the bottom slot of the device, hearing a click sound indicates the battery is securely locked; to remove it, hold the side clip and pull the battery downward.
Head mount installation: Ensure the machine is powered off and stopped. Insert the hex head into the 1/4 inch quick-change head, press it firmly into place to lock it, and gently pull the head to confirm it does not loosen.
Speed gear adjustment: Move the speed control lever at the top of the device. The low speed gear is used for precise tightening of small screws, while the high speed gear is used for quick removal of screws.
Turn control: Move the middle direction switch button. Pressing it to the left indicates forward rotation and tightening; pressing it to the right indicates reverse rotation and loosening. Keeping the button in the middle position activates the safety lock, preventing the trigger from being pressed to start.
Power-on sequence: After all settings are completed, pull the trigger; the trigger stroke can control the speed of rotation; the surrounding light and shadow-free lights will turn on simultaneously.
Task completed: Release the trigger, wait for the output shaft to stop rotating completely, then move the direction switch to the middle safety lock position; press the clamp to remove the tool head; after completing the task, remove the battery and store it separately.
6. Precautions
Wear safety goggles at all times during work, as debris may be generated. Avoid any damage to the eyes caused by debris; it is recommended to wear anti-slip gloves; loose clothing and jewelry are prohibited to prevent getting caught in rotating parts.
This device is mainly used for unscrewing screws; it is not suitable for drilling through hard materials under heavy loads. Forcing drilling is prohibited to prevent the motor from overloading and damaging.
Tool operation status: Do not touch the rotating nozzle or head. The entire device must come to a complete stop before removing or adjusting the nozzle.
Lithium batteries should be kept away from high-temperature sources and open flames; it is prohibited to puncture the battery pack casing. Unused batteries should be removed and stored in a cool, dry place to prevent water ingress and moisture.
During prolonged continuous operation, the body shell heats up significantly. It is necessary to stop the machine and allow it to cool down to prevent the motor from overheating and being damaged.
Tools must not be used in humid or rainy conditions to prevent electrical leakage hazards.
The equipment is stored in a location inaccessible to children; children are strictly prohibited from operating this tool.
If the labeling slips or unusual noises occur during operation, immediately shut down and disconnect power; use can only after troubleshooting and repair are completed.
Finding high quality products in Yiwu
China, Yiwu China Commodity Market (Yiwu wholesale market), the
World's Largest Commodities Trading Center Online.
