This EU standard high-performance instant adhesive is made from high-purity ethyl cyanoacrylate material. It complies with EU REACH and CLP regulations and has SGS environmental testing. The adhesive is a transparent liquid with high bonding strength; it can set in just a few seconds. After curing, the gel remains transparent and does not turn white. It is waterproof, resistant to aging, and operates within a temperature range of -40°C to 80°C. The formula is environmentally friendly, containing no phthalates, heavy metals, or benzene-based solvents, with low VOC levels. It is suitable for household use, manual repairs, and craft restoration.
📌Applicable materials
Metals, wood, ceramics, rigid plastics, rubber, leather, and various handicrafts with damage and repairs
❌Not applicable: foam, PE, PP plastics, soft silicone
📝 Usage Instructions
1. Clean the bonding surface thoroughly and keep it dry without oil residues
2. Apply a thin layer of glue on one side; a small amount is sufficient, no need for a thick coating
3. Press firmly until it fits perfectly, adjust position in a few seconds, and wait for 24 to 48 hours for complete curing to reach maximum strength.
4. Use sparingly; excessive use can cause it to turn white.
⚠️ Safety Warning
This product may irritate the skin and eyes; avoid direct contact. If it accidentally touches the skin, do not pull forcefully, instead, soak it in warm water to allow separation slowly. Please store it out of reach of children, and ensure the operating environment is well-ventilated.
