Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
one 25-watt glue gun, common style.
25瓦常规款胶枪1把 |
CN¥ 10.58 |
one pink, long, narrow-mouth industrial-grade glue gun.
粉色长细嘴工业级胶枪1把 |
CN¥ 17.58 |
said small glue gun dedicated holder, 1 piece [glue gun not included]
赛得小胶枪专用支架1个【无胶枪】 |
CN¥ 8.25 |
1 tile blue industrial-grade glue gun [limited quantity]
20瓦蓝色工业级胶枪1把【数量有限】 |
CN¥ 12.28 |
one 20w glue gun with a narrow mouth [without a glue stick]
20W长细嘴胶枪1把【无胶棒】 |
CN¥ 15.58 |
one 20w glue gun with a narrow mouth +++ [100 pieces of 20cm long glue sticks]
20W长细嘴胶枪1把＋＋＋【100根20cm长胶棒】 |
CN¥ 23.88 |
one 20w glue gun with a narrow mouth +++ [50 x 20cm glue sticks]
20W长细嘴胶枪1把＋＋＋【50根20cm长胶棒】 |
CN¥ 18.38 |
Yi He Super Glue Factory 15yr.
Contacts Liu Xiaofeng Chat
Mobile 13605823616
WeChat 13605823616
White Long-Sleeve Thin-Mouthed Hot Melt Glue Gun 20WSeda SDA-601Handmade tools, small aerosol gun wholesale
SD-A601 20W Fine-nozzle Constant Temperature Hot Melt Glue GunUse a glue rod with a diameter of 7 millimeters
【Applicable】Stable wood, stable plastics and metals, adhesive boxes, stable textiles and shock-proof packaging materials, packaging sealing, and so on……
【Product Features】
1. Rapid heating; it can be used normally after 5 minutes of power on
2. Temperature adjustment and automatic constant temperature design, suitable for EVA rosin synthetic rubber strips, polyurethane synthetic rubber strips, and various low-melting-point rubber strips. The required adjustment allows for appropriate control of the viscosity of the molten rubber.
3. Rapid heating; starts heating immediately. Continuous operation on the production line does not reduce the temperature.
4. High efficiency and energy conservation, reducing power consumption of the sol-gel gun by 50%
5. The glue gun uses an integrated temperature control and heating element, resulting in a long service life.
【Safety】
1. Overheat protection design, built-in temperature fuse to prevent overheating
2. Double insulation, with an electrical strength of up to 3750V, and a insulation resistance greater than 100M‘
3. The gun body is compact and sturdy, made of heat-resistant and shock-resistant plastic.
【Usage Instructions】
1. This series of products is suitable for using rubber strips with a diameter of 0.7 cm.
2. Insert the rubber strip from the end of the spray gun, place it inside the gun, and turn on the power to preheat for 5–8 minutes. Pull the trigger to extrude the adhesive, and you can control the amount of adhesive produced.
3. During use, if a strip of adhesive is not fully used up at one time, do not remove it. When used next time, plug it into power and preheat for 5–8 minutes before use.
White shell, 20 watts, with switch, fine nozzle, SDA-601 hot melt glue gun:
Update time：
TOP
