Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
|
promotional item
活动款 |
CN¥ 5.5 |
|
fixed style
固定款 |
CN¥ 5.5 |
Handsome TV TV shopping products 13yr.
Contacts yingying Chat
Mobile 15356953595
15356953595
WhatsApp 15356953595
All products in the store are priced without VAT invoices or general invoices; an invoice is required. Contact customer service.





Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select the appropriate location for the bicycle in the room, ensuring it is on a load-bearing wall. Place this product at the correct height and position so that the bicycle stands upright at the desired height and position. Drill holes in the wall according to the four screw holes provided. Note that the drill bit diameter should match the expansion sleeve; it is ideal when inserting the expansion sleeve into the hole feels tight. After inserting four expansion sleeves, secure the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are firmly attached.
Installation and usage instructions: Select a suitable location in the room for placing the bicycle, ensuring the wall is a load-bearing wall. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the positions of the 4 screw holes of the product. Note that the diameter of the drill bit should match that of the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting 4 expansion sleeves, fix the product to the wall using 4 screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement and removal. The hook has a large curvature at the front end and an appropriate angle, so the front wheel will not fall off. The rubber cover is long enough to protect the tire rim and spokes. The body and the hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement and removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement and removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement and removal. The hook has a large curvature at the front end and an appropriate angle, so the front wheel will not fall off. The rubber cover is long enough to protect the tire rim and spokes. The body and the hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..






Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select the appropriate location for the bicycle in the room, ensuring it is on a load-bearing wall. Place this product at the correct height and position so that the bicycle stands upright at the desired height and position. Drill holes in the wall according to the four screw holes provided. Note that the drill bit diameter should match the expansion sleeve; it is ideal when inserting the expansion sleeve into the hole feels tight. After inserting four expansion sleeves, secure the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are firmly attached.
Installation and usage instructions: Select a suitable location in the room for placing the bicycle, ensuring the wall is a load-bearing wall. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the positions of the 4 screw holes of the product. Note that the diameter of the drill bit should match that of the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting 4 expansion sleeves, fix the product to the wall using 4 screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with good steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Attachment: 4 metal screws, 4 expansion tubes.
Load capacity: 30KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc.
The hook of this bicycle is made from high-quality material, with excellent steel quality, sufficient thickness, and a heavy weight.600Weight; The overall design is good, with 4 screws used for fixation, evenly distributed between the body and the top. There are reinforcement ribs on the left side of the body to prevent bending from bicycle pressure. The protective panel on the right side is smaller, ensuring no obstruction to the front wheel during vehicle placement or removal. The hook has a large curvature at the front end and an appropriate angle, preventing the front wheel from falling off. The rubber cover is long enough to protect the tire rim and spokes. The body and hook are welded together, providing high strength and durability.
Installation and usage instructions: Select a suitable location within the room for placing the bicycle, and ensure the wall is load-bearing. Place the product at an appropriate height and position so that the bicycle is vertical at the correct height and position. Drill holes in the wall according to the four screw holes of the product. Note that the drill bit diameter should match the expansion sleeve; it is ideal if the hole feels tight when the expansion sleeve is inserted after drilling. After inserting four expansion sleeves, fix the product to the wall using four screws. If your installation skills are limited or the wall quality is poor, it is recommended to regularly check whether the screws are secure.
The fixed part refers to the position of the hook, which is welded in place and cannot move up or down. The advantage is that it makes loading and unloading the vehicle easier.
Product packaging: 50 pcs per piece, with a weight of 0.5.5 KG per piece
Attachment: 4 metal screws, 4 plastic expansion tubes.
Load capacity: 25KG, applicable to all models of mountain bikes, road bikes, folding bikes, etc..
Update time:
TOP