Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
All steelLaboratory benchA relatively special type of furniture, the all-steel laboratory bench must not only possess excellent functional properties but also feature a clean and clear appearance with appropriate colors to improve the indoor environment and reflect contemporary characteristics. The all-steel laboratory bench is also the mainstream product for new laboratories and laboratory renovations in China at present. The bench designed this time is made entirely of steel. Steel structure is an extremely stable construction that can withstand high loads. It can serve as a work platform, a gas emission system, and various experimental instruments. Importantly, the steel frame is manufactured by vertical welding of special square steel, allowing staff to assemble it securely while evenly distributing the total load across the floor.
1.Full-steel laboratory bench panel
1. Corrosion-resistant countertop: 1.2–1.7 mm thick composite laminate countertop. Color: Black / off-white.
2. Domestic (or imported) Qiansi board, 13 mm thick.
3. Domestic epoxy resin board, 15 mm thick.
4. Domestic ceramic plate, 20 mm thick.
5. The surface material fully meets the laboratory’s requirements for corrosion resistance and resistance to acids and alkalis.
6. There are also other imported counter tops.
2.All-steel laboratory cabinet body
With a full-steel floor-standing structure, it can be used individually or in combination. The cabinet height is 800–850 mm.
1. Cabinet body (base plate, back plate): Made of 1.0 mm thick Baosteel cold-rolled steel plates. It has undergone degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating treatment. Colors: 27# blue wrinkled – 22# white wrinkled, 66# blue – 93# white, 68# blue – 144# camel color, 79# gray – 93# white (optional)
2. Side panel: Made of 1.0 mm thick Baosteel cold-rolled steel plate, processed through degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating.
3. Laminate: Made of 1.0 mm thick Baosteel cold-rolled steel plate, processed through degreasing, water washing, pickling, water washing neutralization, phosphating, water washing, and epoxy resin coating. The spacing between the upper and lower sections of the laminate is 15 mm per unit.
4. Door panels and pulls: Made of double-layer 1.0 mm thick Baosteel cold-rolled steel plates, processed through degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating. The interlayer contains sound-dampening material.
5. Reinforcement beams at the top, crossbeams in the middle, drawer guides, and sink support frames: Made of 2.0 mm thick Baosteel cold-rolled steel plates, processed through degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating.
6. Adjust the foot support plate: Made of 3.0 mm thick Baosteel cold-rolled steel plate, processed through degreasing, water washing, pickling, water washing neutralization, phosphating, water washing, and epoxy resin coating.
7. Drawer: Base plate, side plates, and back plate: Made of 1.0 mm thick Baosteel cold-rolled steel plates, processed through degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating.
8. Decorative paneling: When there is a gap between cabinets or between a cabinet and a wall, use a decorative paneling made of the same material and color as the cabinets to cover it.
9. Steel pipeline trench columns: Designed as modular and detachable components.
10. Other structural design standards: All bottom cabinets have a flat-mounted embedded structural design; the baseboard is integrally formed with the cabinet body steel plates, except for the recessed area on the front side; there are no central vertical supports between the two doors of all double-door bottom cabinets.
1. Service passage: There is a distance behind the low cabinet wall for a service passage, used to install electrical, water, and gas pipelines, with a concealed design.
3,Full steel lab bench accessories
1. Handle: Stainless steel C-shaped or aluminum alloy single-bar handle, available for user selection.
2. Hinge: Opened at 9° with Italian FGV, stainless steel hinge.
3. Door slit strip: Made of polyvinyl chloride material.
4. Door latch set: Made of nylon material.
5. Slip-hook: Made of 1.2 mm thick stainless steel plate.
6. Slide rail: Italian FGV base, 450mm long, silent slide rail
7. Drawer door buffer device: made of rubber material.
8. Adjusting feet: M1 0 mm screws (electroplated); Adjustable feet: rubber anti-slip shock-absorbing pads, high-strength steel base frame
Four,Full-steel Lab Bench Reagent Rack
Laboratory Bench ManufacturerThe surface-mounted design facilitates easy configuration, addition, removal, and assembly.
1. Steel support: Made of 1.5 mm thick Baosteel cold-rolled steel plate. It has undergone degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating treatment. The columns are equipped with rows of hanging holes for adjustable panels, with the spacing between the hanging holes adjusted up and down to approximately 40 mm per slot.
2. Slabs: Composed of two layers, upper and lower, made of 10 mm thick tempered glass, with stainless steel railings on the outer edge.
3. Power supply device.
4. Steel wire box: Made of 1.0 mm thick Baosteel cold-rolled steel plate, processed through degreasing, water washing, pickling, neutralization with water washing, phosphating, water washing, and epoxy resin coating.
5. Socket: Multi-functional 220V/10A socket.
Update time:
TOP