1, the use of single-chip and special software to achieve the intelligent control;
2, the use of battery discharge rate characteristics of the correct discharge control. The discharge voltage is controlled by the discharge rate curve of the control point, eliminating the simple voltage control overdosed inaccuracies, consistent with the inherent characteristics of the battery, that is, different discharge rates have different end voltage;
3, with overcharge, over discharge, electronic short circuit, overload protection, unique anti-reverse protection and other automatic control; the above protection does not damage any parts, do not burn insurance;
4, using the series PWM charging the main circuit, so that the charging circuit voltage loss than the use of diode charging circuit reduced by nearly half, the charging efficiency of 3% -6% higher than non-PWM, increased power consumption; Charging, the normal direct charge, float the automatic control system so that the system from a longer life; at the same time with high precision temperature compensation;
5, intuitive LED LED indicates the current battery status, allowing users to understand the use of the situation;
6, all control all use industrial chip (only with I industrial controller), in the cold, high temperature, humid environment to run freely. While the use of crystal timing control, timing control accuracy;
7, cancel the potentiometer to adjust the control set point, and the use of E-side memory records the work of the control point, so that the set of digital, eliminating the potentiometer vibration bias, temperature drift, so that the control point error reduction accuracy and reliability Sexual factors
8, the use of digital LED display and settings, one-button operation to complete all settings, the use of extremely convenient and intuitive role is to control the work of the entire system, and the battery played a charge protection, over discharge protection role. In the larger temperature difference, the qualified controller should also have the function of temperature compensation. Other additional functions such as light control switches, time control switches should be optional controller.
