1: Performance Features

Lead-free alloy tip

1. This product uses high-tech ceramic PTC thermistors as heating elements, ensuring accurate temperature control. It can be used normally with AC or DC power sources between 100V and 240V, and is equipped with built-in safety fuses.

2, electrical insulation strength does not break down at 3750V/minute, with a voltage resistance of 330V/3 minutes.

Application of the Product

1. Toy models. 2. Artificial flowers and Christmas trees. 3. Decorations, metal products. 4. Wooden products, cardboard. 5. Electronic circuit boards.

Three: Usage Method

1. This series of products can be used for diameter sizes ranging from 10.8 to 11.5 millimeters.胶条。

2, insert the adhesive tape into the gun tube from the end of the glue gun, plug in the power and preheat for 5-8 minutes, then pull the trigger to squeeze out the melted glue, and you can control the amount of glue.

3, During use, if a whole rubber band is not used up at one time, do not remove it. You can use it again by plugging in the power and preheating for 5-8 minutes, then use it directly.

Four: Caution

1. This product is a high-temperature glue gun. If the user uses glue strips of incorrect size or type, it may cause the glue to reflux and damage the glue gun.

2, the nozzle of the hot glue gun and the melted adhesive are at a high temperature, so do not touch it with your hands. It is prohibited to use it in places with flammable and explosive materials.

3, when using a glue gun, do not lift it high, and the nozzle should not be pointed upwards. If the glue gun is not used for 15 consecutive minutes, please turn off the power to prevent the glue from melting backwards and damaging the glue gun.

4, When the new glue gun is used for the first time, there may be a little smoke, which is normal. After 30 minutes of use, the smoke will automatically disappear.

5, it is necessary to maintain the cleanliness of the gun tail slider frequently to ensure that the adhesive tape can be smoothly inserted into the gun barrel, and it is prohibited to pull the adhesive tape out of the adhesive gun from the rear end.

6, when the glue gun is not in use, it should be placed in a place with good ventilation and dryness. It is prohibited to place it in a place with moisture or water, and it is prohibited to place it in a place where children or children can reach.

7, this tool must be placed on its stand when not in use.