"Product name": XM-007A navigation mobile holder

"Material": high-quality hardware +ABS+ universal bracket

"Specifications": adjust the width of 55CM--12.2CM

"Color": black

"Weight": 0.10 KG

1. the wheel is free to rotate 360 °, using wheel lock to lock. Edge of the lock icon indicates to operate.

2. the slider track free sliding pallet 360 ° free rotation and sliding. Avoid cell phone

Keys and other data interfaces.

3 ． Increase design, two air conditioning, irons, available accessories and automobile air conditioning on the window to match.

Product performance:

1. Double clamp arm hydraulic resistance, bi-directional pops open with a smooth, low noise, speed and other features. Closing clamp arm (42-116mm), suitable for all kinds ofGPS, smart phones, and other products.
2. Freestanding slide blocks and freestanding pallet design can avoid the phone side keys and other data cable connector.
3. Support good adsorption, by spinning the turntable of bearing and bracket can be adjusted to different angles, and easy to use.

Installation instructions:

1, the suction cup bracket connector at the top four cards with the main phase combines and pull into the holes in the disc, confirm that the firm.  Through Rotary

Turning bearing and bracket wheel adjust the desired angle;

2, remove suction cup at the bottom of the protective film, Chuck has been on a car windshield clean and pressed, pull pressure valves, 

Adsorption is firmly recognize Chuck brace;

3 , hand-pressed buttons, natural smooth two-way bounce off the bracket clamp arm, among other products such as GPS or PDA into the clamp arm

Position, adjust the proper height and width will clamp arm to push the jammed.

4, the accessory disc: ripped red layer on surfaces that have been cleaned (minimum DIA 58MM) compress, RIP 

Chuck the protective film on cleaning clean the Central disc symbolizes the compress, turn the vacuum valves to confirm locking State has been reached;

5, fitting sponge plaster: in case not to use photo paper, you can use it to replace the central location of the photo paper; 

6, the air conditioning button use: place the air conditioning button card round feet along the back side of the main air conditioning Jack slot after importing and reverse twist, confirming 

To the docking state, principals can use air conditioning at this time pull the foot and used the air conditioning in the car window.

Removal instructions:

  1 , first with one hand hold the PDA/GPS products, other hand, press the main button, automatic eject after removing the clamp arm products;

2 , remove bracket and switch valve is open, up PVC suction cup at the bottom edge of the suction cup bracket and remove the bracket.