1. The product name is tile positioning cross, also known as plastic cross. The foreign name for this product is: Tile spacer, Plastic cross, which translates to tile spacer, tile locator, or plastic cross.
2. The product material is currently commonly used in the domestic and foreign market is inferior chemical materials. Our company uses the best PE material with a magnetic white color. The advantages of PE material are good toughness, good tensile strength, impact resistance, moisture resistance, chemical resistance, not easy to burst, and at the same time non-toxic and environmental protection.
3. Product specifications: Our company's specifications include 10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, etc. The 15mm specification refers to a width of 15mm.4. Product Usage: For tile positioning, normally one cross is required for each tile. If the 5mm crosses can be removed after the tile dries sufficiently, they can be reused three times, which can save some costs. However, the 3mm and 2mm crosses are difficult to remove, as they may easily chip the tile. They can only be removed once the tile is completely dry, so they are usually not reusable. If you do not want to remove them, you can leave them inside and they will be hidden once the grout is filled. It is recommended to purchase one cross for each tile based on this principle.
5. Product Usage:
1) Lay flat
2) Stand upright
6. Product Usage
Firstly, it helps you effectively adjust the size errors of the wall tiles, making the overall appearance more beautiful;
Secondly, it is necessary to leave a stretchable joint for the wall tiles to avoid the compression of the upper row of wall tiles on the lower row causing air pockets or detachment of the wall tiles.
Thirdly, adjust the size of the gaps between the tiles to ensure that they are neatly and beautifully installed, and that the gaps between the tiles are consistent and even.
Update time：20220223173227
