Notes:

1. carefully unscrew the intake air

2. inflatable 1-3 minutes depending on the temperature range from basic surface button after tightening the intake

3. pillow inflatable deflated when fingers pinching air intake

4. air cushion belt buckle on both sides, can two or more stitching

1, first-time users:
1) open air cushion
2) open the gas nozzle, air bed automatically expands. Closed mouth, repeatedly folding air bed and pressed a few times, and then open the valve, automatic air bed expansion, flexibility and shape make it fully.

2, charging methods:
1) open air, open the gas nozzle, air mattress will automatically begin to swell.
2) Please wait until air bed expansion completed, then tighten the valve cover.
3) adjust air pressure to adjust its? fishermen from the ugly reality flexible?
Note: if permanent custody in a rolled up State (not recommended), please use blow several times expanded its restore elasticity.

3, exhaust method:
1) open the gas nozzle, rolled up at the other end of the air nozzle, press out the air.
2) close the valve, air bed rolled up at the other end, once again opens the valve residual air out.
3) finally closes the valve, can always rolled up state.
Note: keep outsourcing when carrying bag, to avoid scratches.

4, storage methods:
open air, open mouth, keep in a cool, dry place (eg: placed under the bed or behind the sofa and so on), because air bed foam shape memory, quickly expanded into the shapes you use most often.

5, repair methods:
1) confirmed the leak where blowing after swelling closes the valve, water or diluted SOAP water to wet the rear surface, fold into half, knees pressed to weight pressure sparkling place is flat, please make a mark.
2) small holes in repair: air bed is completely dry, releasing air and drops of glue on at the hole. Because row out of the air, so agents can be inhaled and the hole sealed. Adhesives after hardening.
3) damage repair: an air mattress to dry completely discouraged, tinkering on the piece of cloth glue, gummed hole air bed surface, dry 30 seconds to 3 minutes (depending on the temperature level), attached under the tear, flattened and kept for 4 hours before use.

6, clean:
will an air mattress inflated to the maximum limit, tightly close the valve, with a soft brush and low exciting household degreasing detergent or lotion, wash thoroughly after washing with water in the bath, completely dry save.

7, notes:
1) not near sharp things (barbed plant or sharp stones or blades).
2) when not using a tent, air mattress bed bed cloth.
3) do not use as a buoyant.
4) keep away from flames or sparks.
5) at high temperature, do not place the expansion and close the valve to the air bed where cars or tents.
6) not stained with suntan oil or basic medicines.
7) not to long exposure to sunlight, ultraviolet surface material slowly could suffer.
8) Please put pet cannot touch the place.
9) valve part is hard, at rest should avoid it.

Notes:

Size: about dimension because it is handmade so the mark is normal, not quality problems

Chromatic aberration: the goods are taken in kind, but did not rule out because the reflective display, exposure causes appear small excursions