Product name: mini car vacuum cleaner.

Size: product: 18.5*11.5*9cm.

       Packing: 19 * 10 * 12.5 cm

Weight: 520g (including packaging)

Color: blue

The product introduction: the winter spring weather is dry, the dust is too much, if let them stay in the car, easily produce bacterium and damage human health! To prevent dust and water quality, it is a good choice for this power, very powerful, and equipped with duck bill tube, can be sucked into any corner! You can also suck a lot of water, there are drinks or other liquids to spill on the car and don't worry! The noise is very small and the power is strong. Plug in 12V cigarette lighter power supply can be used, power wire 4 meters convenient you clean the car inside every corner. The vacuum cleaner can absorb water, which can be easily removed by water or drink in the car.

Product features:
1. The front cover is transparent and removable and equipped with a special filter to facilitate regular cleaning.
2. Equipped with transparent storage tank with a volume of 0.5KG, which can store the adsorbed liquid.
3. Equipped with a special corner to adsorb flat head, can adsorb corner dust, attractive.

Usage:
1. Insert the power supply into the cigarette lighter in the car.
2. Switch the control key ON the upper part of the hand, push the control button to the position of ON, and then stop using it.
3. Replace the suction nozzle with different use occasions, and the four-meter long cigarette connecting line is sufficient to cover the vacuuming of any position within the vehicle;
4. Use the suction inlet flat on the ground to achieve better results.
5. The front of the power control key has the front shell device key, and the front shell can be removed and the front shell can be removed. When it is finished or must be cleaned, the front shell is removed to clean the filter screen to extend the life.  The cleaning screen must be kept away from the eyes and ears. The product should not be used for the adsorption of burning articles, such as cigarette butts in combustion. We should pay attention to  When absorbing water and moisture, pay attention to the height (capacity) of the front cover, and the suction height must not exceed the resistance pipe.(before continuing, it must be turned off.  Open the front cover and pour the liquid back.
 
Notes:
1. The filter must be installed when used.
2. Don't shoot straight in the sun. Don't use it in high-temperature and elegant places.
3. Do not wipe the body with gasoline or volatile detergent.
4. The front shell should not be taken down when the motor turns.