Electronic scale model: JHS-550

Scale specification: 230 * 210 * 45mm

Outer box size: 570 x 500 x 350mm each box 20 sets (wholesale group purchase is welcomed)

Net weight: 865 grams per set gross weight: 1030 grams

Table size: 21 cm x 16 cm (30 small convex points on the scale)

Screen size: 65*25 mm (subduction design, can read if the package is larger than the scale)

20 foot container load: 11,800 units

Equipped with high precision tension sensor system

LCD LCD with backlight band external ac power supply

Range: 6000 g X accuracy 0.5 g  10 kilograms x precision 1 gram 15 kilograms X precision 1 gram  20 kilograms X precision 1 gram  25 kilograms X precision 1 gram

Auto reset/auto close (automatic shutdown over 10 minutes after no operation)

Unit selection (kg/g/ib/oz)

Overload/low voltage battery indication

Can use ac power, 9 volt -12 volt transformer. (the transformer is not included. The hardware store can buy it for ten yuan.)

Power: 1.5v * 2 AAA dry batteries (2 knots)

Ac power is also available (not to be Shared with the battery)

Usage:
 
1. The boot:
 
   Put the electronic scale in a horizontal place and press the \"TARE\" button to start the machine. At this time, \"8888\" will be displayed to check the zero point and wait for stabilityThe weight can be weighed when zero weight is displayed. If you press the \"TARE\" button longer and hold it for two seconds, you will turn it off. ifThe electronic scale will shut down itself without weighing and no button for 120 seconds.
 
2. Unit conversion:
 
   In normal weighing, press the \"MODE\" button to carry out \"g\" -> Oz -> Pounds (lb)\"Between the weights, 1 kilogram =35 ounces =2.2 pounds.
 
3. Peel them:
 
   When using the container to weigh the goods in bulk, you can first place the container on the scale and press the button \"TARE\" to wait for the weightAfter the window shows zero, the net weight of the goods can be obtained by loading the goods to weigh them.

4. Count

1) put a certain number of weight objects (such as 25,50,75,100) to be weighed.

2) after pressing the \"PCS\" button for two seconds, it will be displayed as \"100\".

3) press the \"MODE\" button and it will be displayed as \"25,50,75,100\".

Please select the number to be weighed. Then press the \"PCS\" button to confirm.Place the object in the center of the scale and the LCD screen will show the exact number of objects.

 
5. The calibration:
 
   When you feel that the weight of the product is not correct, you can recalibrate it yourself. First to ready to calibration range of Jordan farmar, electronic scale boot first, rapid holding down the \"MODE\" button until the window shows \"CAL\" let go, again according to the \"CAL\", enter the calibration status, display \"3000\" (according to the capacity of the scale) flashing three times. Add 3, 000 grams of standard weight, depending on the scale's capacity, and wait three or four seconds before the display shows up\"PASS\" and \"3000\". Remove the weight, press ON/OFF, turn OFF the electronic scale, and complete the correction.