EK11 product features:

High quality tempered glass automatic zero tracking overload warning patent styling touch PTT switch 4 high precision sensors, 60 seconds auto power off or press 3 seconds undervoltage shutdown prompt

To use: place the scale on a hard, flat surface (otherwise the weighing accuracy). Gently touch buttons "on/reset" (ON/TARE), that is, up to the "8888" back to zero. Enter weighing State. In the weighing mode, in desired weighing objects on the glass top is placed centrally, immediately in the display window shows the weight of the body. In the weighing mode, touch the "power on/reset" (ON/TARE), can be zero, or in addition to skin. In clear or skin removal process, display "zero" (TARE) logo, scale zero displays "0.0" after weighing. In boot mode, touch press "on/reset" (ON/TARE) button for 3 seconds and hold the scales off. Powered on State, without weighing the scale 60 seconds auto power off

Note: the product surface dry, do not use chemical solvents to clean the scale body and, if necessary, clean the scales with wet damp cloth, but should avoid water entering the scale body. This product is non-Slam, beat, or may even cause the weighing no or permanent damage. Do not use this scale in overly stuffy environment. Do not exceed the maximum weighing capacity of the scale using the scales. If the scales power on no display, check the battery with the contacts for good contact, if scales to be used for a long time, you can confirm whether it is necessary to replace the batteries and try again.

To use: place the scale on a hard, flat surface (otherwise the weighing accuracy). Gently touch buttons "on/reset" (ON/TARE), that is, up to the "8888" back to zero. Enter weighing State. In the weighing mode, in desired weighing objects on the glass top is placed centrally, immediately in the display window shows the weight of the body. In the weighing mode, touch the "power on/reset" (ON/TARE), can be zero, or in addition to skin. In clear or skin removal process, display "zero" (TARE) logo, scale zero displays "0.0" after weighing. In boot mode, touch press "on/reset" (ON/TARE) button for 3 seconds and hold the scales off. Powered on State, without weighing the scale 60 seconds auto power off.