502glue is dominated by ethyl α-Cyanoacrylate, adding viscosity increasing agent, stabilizer, plasticizer,inhibitor, such as through advanced synthesis process of single-component instant curingadhesives.

Using method

1, first clean surface, remove surface dirt, grease, rust and so on, when the metal, the best PACKING, such as PE, PP and PTEE plastics, surface activation first.

2, open the front cover, and tapped her fingers on the tip part, so there is no residual fluid, then the scissors to cut out the hole.

3, was followed by dropping a small drop of glue, instantly and keep up to harden, then size should not be too large, then the layer thickness should not exceed 0.2mm.

4, after use, wipe the container and lid and store in a cool, dry place or refrigerated.

 

Matters needing attention

1, glue vapors can irritate mucous membranes and eyes.

2, avoid contact with skin and eyes, if by accident, immediately wash with plenty of water and taken to hospital, wash eyes use a dilute solution of sodium bicarbonate.

3, touching hands, SOAP, water, washing-up liquid and a pumice stone washed

Cleanup method

1, you can find the wet hot towel in 502. A dozen minutes after curing 502 will become soft, can be cleared.

And to live where there are 502 then drop a drop of 502, curing 502 will become soft, this can also be removed with a towel.

2, where it was 502 502 to melt on drops, and then quickly washed away.

3, insulating oil, pour transformer insulating oil at table, 502 glue will soon become soft and can begin to rub out.