1. measuring range:-500g value 0.1g 100g/0.01g

2. power supply: four 2 electronic

3. multiple unit conversions: g/oz/CT/GN/ozt/DWT

"Product features"

1. the high-resolution backlit

2. Peel weighing a variety of weighing display

3. to reset to zero, automatic shutdown function

4. have brownouts and overloading function

5. display: LCDdisplay blue automatic backlight

6. the tests on their own, automatic error correction function,

7. high precision, high definition, high resolution

Deduction/peeled how to operate:

1, boot back to zero;

2, pulling the weight on the scales;

3, pressing the Peel key shows0.0or0.00and represents the deduction;

4, then load the weighing of goods, reading is net weight

Correction:

Turn on quickly and hold the UNIT press and hold, until CAL appears in the open, and then click Unit 500 (model 500 or 100 is displayed accordingly) flashes and the Show on 100g (200g or 500g) weights there 2 seconds PASS shut down save weight

Notice for use:

1, this product is the largest weighing no more than the greatest range.

2, overload will be permanent damage to the product.

3, the product is not exposed to extremely cold or hot environment, the product in a normal environment to work, before use, adapted for at least an hour in a new environment.

4, before use, power on the scale's internal components with weights weighing several warm-up, this will make it more accurate weighing.

5, put the appliance in a clean environment, dust, moisture and vibration, air flow, or EMI will have adverse effects on stability and accuracy of the product.

6. handle with care, when weighing the goods should be gently placed on the scale, in order to avoid inaccurate weighing or damage the scale's internal components.

7, due to the high precision of products, so use very carefully, to avoid vibration or drop.

8, used on a stable and level surface with no wind.

⊙ Use please ensure that no electromagnetic interference on the 50cm around so as not to affect the accuracy

⊙ Used at 10-30 environment, excessive temperature difference may cause error

Weighing the first element of inaccuracy or failure low battery, incorrect calibration, overload or operate on non-level surface. Please note that the above mentioned several points, with correct use and maintenance of your product.

1, do not show or display low battery symbol "Lo" will have to change the batteries;

2, "EEEEE" overload, immediately remove overload;

3, "o_ld" scales of operation due to an error within the core part is damaged (for example, impact, dropping or overload), try the calibration again, if the sensor is not serious damage, then the calibration can be used after.

4, showing the88888, in a vibration-free, stable, flat work