X Email Mobile
EXW Price: |
|
Main Products: |
Electronic scale,jewelry scale,kitchen scale,body scale,health scale,portable scale,sealing machine |
Contacts: | Jin XiaolianChat |
Mobile: | 86-13857964356 |
E-mail: | 654973075@qq.com |
WeChat: | 13857964356 |
Address: | 15430 , 9 Street, 2 F, 44 Gate, International Trade Mart (District 2). |
1. power supply: 2 c batteries
"Product features"
On/off (open key)
MODE (unit conversion keys)
TARE (peeled and zeroed key)
1. the high-resolution backlit
2. Peel and heavy scales,
3. go to zero, the auto power off function
4. have brownouts and overloading function
5. display: LCD display white automatic backlight
6. high precision, high definition, high resolution
Deduction/peeled how to operate:
1, boot back to zero;
2, pulling the weight on the scales;
3, pressing the Peel key shows0.0or0.00and represents the deduction;
4, then load the weighing of goods, reading is net weight
Notice for use:
1, this product is the largest weighing no more than the greatest range.
2, overload will be permanent damage to the product.
3, the product is not exposed to extremely cold or hot environment, the product in a normal environment to work, before use, adapted for at least an hour in a new environment.
4, before use, power on the scale's internal components with weights weighing several warm-up, this will make it more accurate weighing.
5, put the appliance in a clean environment, dust, moisture and vibration, air flow, or EMI will have adverse effects on stability and accuracy of the product.
6. handle with care, when weighing the goods should be gently placed on the scale, in order to avoid inaccurate weighing or damage the scale's internal components.
7, due to the high precision of products, so use very carefully, to avoid vibration or drop.
8, used on a stable and level surface with no wind.
Troubleshooting:
Weighing the first element of inaccuracy or failure low battery, incorrect calibration, overload or operate on non-level surface. Please note that the above mentioned several points, with correct use and maintenance of your product.
1, do not show or display low battery symbol "Lo" will have to change the batteries;
2, "EEEEE" overload, immediately remove overload;
3, "o_ld" scales of operation due to an error within the core part is damaged (for example, impact, dropping or overload), try the calibration again, if the sensor is not serious damage, then the calibration can be used after.
4, showing the88888, in a vibration-free, stable, flat work.
TOP
Items have been added to the Inquiry Basket
There are items in the inquiry basket