The car battery line by line cable car emergency supplies Guojianglong battery clip.

产品名称：3平方简装汽车电瓶线、搭火线

Product Name: 3 square Lite car battery line, a line

产品规格：线长220cm 夹子13.8cm 总长2.5米左右

Product specifications: length 220cm clip 13.8cm with a total length of 2.5 meters

电缆规格：外径约为7.8mm 里面电线3个平方毫米

Cable specifications: diameter is about 7.8mm in line 3 square mm

产品重量：0.7Kg

Product weight: 0.7Kg

包含产品：一根红色电瓶线、一根黑色电瓶线（共四个镀铜夹）

Products include: a red battery line, a black battery line (a total of four copper clamp)

Products introduction:

After flameout DVD listen to music in the car, forgot to turn off the light, these actions will soon put the battery in the battery depletion. When you turn the key to start the car, you'll find out, not on fire. This is inevitable, because the battery has been unable to drive the starter, how to do this time? If it is a manual transmission car, can hang a cart ignition, but if is automatic car, it is invalid. What am I gonna do? Rescue? If the hand or passing cars with a live wire, it need not be in such trouble.

When your car because don't worry no power could not beat the car from the side of the road, hit a taxi at a clip easily. Very few cars had no electricity, but once in a while have no electricity, really annoying. Not afraid of ten thousand, just in case, or take a battery clip will be good. Without any menace from the "rear".

The procedure is as follows:

(1) the start line of the red wire clamp on "red cell anode was saved.".

(2) and then the other side of the red wire clamp red cell anode in the "rescue" car.

(3) the black wire clamp on the "black car battery is saved".

(4) and then the black wire clamp in the "rescue vehicle" black negative battery.

(5) to start the engine of the "rescue vehicle", and then start the "rescued" car engine. If it is found that the rescued the car still can not start, check the metal contact parts is bad.

When completed to start the engine, still need to be removed in order to start a fire, or they may cause a short circuit.

Remove line procedure is as follows:

(1) the "rescued car" black wire removed。

(2) the "black wire rescue vehicle" removing.

(3) and "the red wire rescue vehicle" removing.

(4) the "red wire rescued car" removing.