Usage:1. Clean the walls.

2. Remove the white paper and stick it on the wall. It is best to spread the oil-proof paper from the middle to both sides together.

3. If the wall area of hearth is large, two pieces can be used.

Operation method:

1. Clean the place where the film should be attached. Do not leave any residual oil stains (otherwise the glue will lose its function).

2. Measure the wall and cut the film into the required size.

3: will need a sticker on the ceramic tile water (cloth with detergent also does not affect the effect), and make it moist (to make the film sliding is convenient, can put on some more water), the film to the double layer structure, separate the paster two layer, there will be stick on the ceramic tile adhesive side, than the good location, a bank card or a flat card scrape water, no air bubbles.

4: after the paste, if you think the paste is not ideal, you can tear it off and reattach it

Tip: too long of the kitchen decorate, ceramic tile seam oil pollution is big, you can clean the ceramic tile, the ceramic tile seam on the oil stained with some paper and surrounding ceramic tile color close or other fillers of similar color, and then paste the membrane, the kitchen pretty much all of a sudden. The rest of the protective layer can also be retained, sprinkled with water, which can be inhaled on the platform next to the gas stove, catching the oil spilled when cooking

It can also be attached to the cabinet under the sink. Microwave surface; The surface of the refrigerator is smooth (but not oven-like). You can attach a small piece of the material to see if it can be attached. The lower side of the kitchen cabinet facing the counter; The surface of the cabinet under the sink where water is often exposed.