Installation method:

• 1. Remove the lower the boot door license plate light;
• 2. Install this camera;
• 3. Take electricity directly from the original license plate light line;
• 4. Connect Video cable to the display screen, wiring;
• 5. Connect the reverse gear;
• 6. Test effect,

  

 

modeling scheme:
License plate lamp type, a camera is attached to the right bottom of the license plate lamp to restore the lighting effect of the lamp to the greatest extent.
The product is attached with the power taking lead to restore the power taking method of license plate light.

Modeling advantages:
The loading position is unified, the structure of the original car is not damaged, and it is perfectly combined with the car.
Good concealment, almost no camera can be seen behind the car, (subject to the actual loading effect) Super shockproof,

installation method (with installation process):
Install the camera according to the installation instructions, debug the camera working effect, debug the license plate light working effect, confirm the effect, and install it.

Waterproof IP68 grade: Waterproof design and strict inspection

Product Numbers:

Products:

OV7950 / PC1030

 

Modelling advantages:

According to the car without destroying the original style design, structure, and automobile car perfect combination.

 

Special technical parameters:

Imaging device: OV7950 / PC1030

Imaging 4.080 area: 3.102mm mm *

Field of view: 170 degrees

Optical lens: EFL = 1.8mm

Pattern: NTSC

Resolution: 656*1191

30fps: 1 ratio

The minimum light: 0.3 Lux

Working voltage: DC12V (+ / - 10%)

60mA: working current

Video output: RCA interface, 1.0 Vp - p, 75ohm

Signal-to-noise ratio: more than 48dB

Working temperature: - 20 ~ +85 degrees, RH95%

Housing materials: aluminum alloys, seismic resistance, wear-resisting, high and low temperature resistance

Waterproof IP68 level: the waterproof design and strict testing water