Product Efficacy
· The powerful WD-40 can effectively remove sticky, greasy, and oily residue from range hoods, gas stoves, and other areas. It can also effectively remove residual sauce stains, milk stains, peanut butter, sugar stains, egg stains, and ketchup from various surfaces in the kitchen.
· During the cleaning process, there is no irritating odor. After cleaning, it leaves a pleasant fragrance.
· Can effectively remove common Escherichia coli and Staphylococcus aureus in daily life.
Applicable Scope
· Suitable for various heavy oil-contaminated surfaces in the kitchen.
· Remove the oil from the range hood and gas stove, and clean the surfaces you often touch.
· At the same time, it is suitable for light oil stains on surfaces such as kitchen countertops, microwaves, sinks, walls, cabinets, and floors.
Usage Method
· Rotate the nozzle to "ON" (on) and spray directly at a distance of 20 centimeters from the oily surface. Wipe it clean with a cloth.
· For particularly stubborn oil stains, wait a moment before wiping them.
· Clean the range hood, spray the product on the fan blades, leave for a moment, then turn on the exhaust, and the oil will quickly dissolve and be sucked into the oil tray, without needing to disassemble.
· After use, rotate the nozzle back to "OFF" (off).
· If the liquid does not flow smoothly after prolonged use, this is a normal phenomenon caused by accidental air entering the suction tube. At this time, simply block the nozzle ("ON" state), activate the spray gun to spray the air out of the tube, and the device will return to normal operation.
Notes
· Please store in a place where children and pets cannot easily reach. If ingested, please drink a large amount of water and seek immediate medical attention.
· This product may irritate the eyes. If it gets into your eyes, immediately rinse with clean water.
· Avoid prolonged contact with the original solution, if necessary, wear gloves. If direct contact is prolonged, please wash with water.
· For cleaning purposes, do not leave the product on the surface for a long time. Before using on unapproved surfaces, test the effect in a small area first.
