【Product Features】
1. This product uses high-tech ceramic PTC (Positive Temperature Coefficient) thermistors as heating elements, which heat up quickly. PTC thermistors maintain a constant temperature, stopping the temperature from rising once it reaches the design temperature of the glue gun, preventing damage to the heating element and conserving energy, thereby extending the service life.
2. The electrical insulation strength of this product does not break under a 3750V/minute continuous voltage, and it can be used normally in an AC or DC power supply between 100V and 240V. It is not limited by voltage fluctuations, and it is equipped with a built-in safety fuse for safer use.

【Usage Method】
1. This series of products can be used for rubber strips with a diameter of 10.8-11.5mm.
2. Insert the adhesive tape into the glue gun at the end, and push it into the barrel. Plug in the power and preheat for 5-8 minutes. Then, pull the trigger to squeeze out the adhesive, and you can control the amount of glue.
3. During use, if a whole rubber band is not used up at one time, do not remove it. You can use it again by plugging in the power and preheating for 5-8 minutes, then use it directly.

【注意事项】

1. The use of voltage 100-240V, frequency 50-60Hz.

2. This product is a high-temperature glue gun, and it should be used with the corresponding size of glue sticks according to the product series. If the user uses glue sticks of the wrong size or type, it may cause the glue to reflux and damage the glue gun.

3. When working with the glue gun, the nozzle and the melted adhesive are at a high temperature, so do not let your body come into contact with it. Do not use it in places with flammable and explosive materials.

4. When using a glue gun, do not lift it high, and the nozzle should not face up. If you do not use glue for 15 consecutive minutes, please turn off the power to prevent the glue stick from melting backward and damaging the glue gun.

5. Due to the addition of durable materials in the glue gun, there may be smoke emitted during the initial use. After 30 minutes of use, the smoke will automatically dissipate.

6. It is necessary to maintain the cleanliness of the gun tail slider frequently to ensure that the glue stick can be smoothly delivered into the gun tube.

7. Do not pull the glue stick out of the glue gun at the back.

8. When the glue gun is not in use, it should be placed in a place with good ventilation and dryness. It is prohibited to place it in a place with moisture or water, and it is prohibited to place it in a place where children or children can reach.

9. This tool must be placed on its stand when not in use.

10. Please do not replace the power cord without authorization. If you need to replace the power cord, only the relevant personnel who meet the requirements of electrical appliance product maintenance can replace it.